BAUMAN Hay Fluffer Tedder Operator's Manual

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

Download this manual

Operator's Manual

Manufactured in Canada

Table of Contents

Need help?

Do you have a question about the Hay Fluffer Tedder and is the answer not in the manual?

Questions and answers

Summary of Contents for BAUMAN Hay Fluffer Tedder

Page 1 Operator’s Manual Manufactured in Canada...
Page 2: Table Of Contents
Contents Introduction: ................................... 2 Dealer Information: ................................2 General Information: ................................3 Attachment / Setup / Adjustment: ............................3 Transporting the Machine: ..............................3 Field Setup: ..................................3 Height Adjustment: ................................4 Maintenance:..................................4 Safety: ..................................... 5 Safety Labels: ..................................5 Parts List: ....................................
Page 3: Introduction
Congratulations on your purchase of a Bauman Hay Fluffer Tedder. Thank-you for choosing a quality product from Bauman Manufacturing Ltd. We strive to build a quality piece of equipment and with a little care and maintenance this machine will work for you for many years.
Page 4: General Information
General Information: The Bauman Hay Fluffer Tedder is designed to gently lift and release hay with minimum leaf damage. This machine is designed to fluff hay, forage crops or straw only. Bauman will not cover under warranty a tedder that has been used outside of these crops. The operator must read and understand all the information in this manual to make sure that you operate the machine correctly and thus avoid unnecessary risk of accidents and breakdowns.
Page 5: Height Adjustment
Height Adjustment: To adjust the height of a turnbuckle lift tedder, you must disengage the PTO shaft, shut off the tractor, and wait until the machine comes to a complete stop. Now rotate the turn buckle under the PTO shaft to change the height of the reel.
Page 6: Safety
Safety: Always stop the tractor engine before you adjust, lubricate, or repair the machine. Remember to remove the ignition key to make sure no one starts the tractor while you are repairing the machine. Below you will find the precautions of which the operator must have thorough knowledge: - Always read and obey warning/danger labels.
Page 7: Parts List
Parts List: Code Description 5910 600 PTO SHAFT 5910 800 GEAR BOX 2MBL4.9 PULLEY 2B13.6 PULLEY QT-104 BUSHING 1-1/4” SK-106 BUSHING 1-3/8" BLTBX091 VEE BELT UCF 206-20 BEARING 1-1/4” UCP 207-22 BEARING 1-3/8” SA 206-20 INSERT 1-1/4” ELC FL6-Z FLANGETTE 2 BOLT 5910 461 BEARING TIGHTENER 5910 460...
Page 8 Parts List Continued: Code Description 5710 340 REEL TUBE W/FLANGE DRIVE END 5910 340 REEL TUBE W/FLANGE DRIVE END 5910 300916ST SPRING TINE TOOTH 5710 200 TEDDER FRAME 7' 5910 200 TEDDER FRAME 9' 5910 100 TEDDER HITCH 5910 700 WHEEL 95-060 TANDEM WHEEL...
Page 9: Parts Breakdown
Parts Breakdown: Turnbuckle Lift Tedder...
Page 10: Hydraulic Lift Breakdown
Hydraulic Lift Breakdown...
Page 11: Belts & Reel Components
Belts & Reel Components Cam Components, Exploded View: Note Item 43 is shown for reference only, this component is welded to the reel assembly.
Page 12: Operator Notes
Operator Notes:...