Summary of Contents for Tuputech TupuCheck Pro
- Page 1 TupuCheck User Manual TupuCheck Face Recognition & Thermometric Access Control Terminal Please read this Manual carefully before use.
-
Page 3: Table Of Contents
CONTENTS · 1-Preface · 2-FCC regulations 01-03 · 3-Safety Precautions · 4-Packing List · 5-Appearance · 6-Power Supply · 7-Installation Precautions · 8-Installation Instructions 07-11 · 9-Basic Operation 12-26 Please read this Manual carefully before use. -
Page 4: 1-Preface
1-Preface To ensure safety and prevent any damage, please read this manual carefully before installation and follow the instructions herein. Store this manual in a secure place for future reference. 2-FCC regulations 2AWGCTUPUCHECKPRO This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may... - Page 5 comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
-
Page 6: 3-Safety Precautions
Configurations. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.” 3-Safety Precautions Do not place the device in extremely hot (refer to the specification of the device for the detailed operating temperature), cold, dusty or damp locations, and do not... -
Page 7: 4-Packing List
4-Packing List Item Quantity Unit Access Control Terminal Wall mounting bracket (optional) Turnstile mounting bracket (optional) 5-Appearance 4.1 Dimension 4.2 Wiring Wiegand 26/RS-485 Relay DC12V-2A RJ45 Ethernet RS485 124mm 23mm... -
Page 8: 6-Power Supply
6-Power Supply Please use correct power adaptor, DC12V (regulated), to operate this device. The powe tolerance of this unit is DC 12V ± 10% (DC10.8V~13.2V), over maximum DC12V power input may result in the damage of the device. 7-Installation Precautions 7.1 Before installation Make sure the device work under stable power supply and network. -
Page 9: 8-Installation Instructions
8-Installation Instructions 8.1 Wall mounting Install the Type 86 Switch Box 1.5m high on the wall; Pull the network cable and power-supply cable into the Type 86 Switch Box (to enable the access control with device, control line also needs to be included) Fix the wall-mounting bracket to the Type 86 Switch Box with 2 M4x25mm screw;... - Page 10 Connect the network cable to the RJ45 Ethernet inter- face, connect the power to the DC power supply, (to enable access control system, also need to connect control line for access control to the relay interface), put all the cables into the Switch Box. Note: To connect the relay Option A: Terminal with ring, the port labeled “12V”...
- Page 11 Insert the main device into the wall-mounting bracket (refer to the solid arrow), and fix the main device with 3 screws (refer to the dotted arrow). Align the device with bracket 8.2 Turnstile mounting Drill holes of 3.5cm in diameter on the turnstile's surface; 3.5cm hole Turnstile...
- Page 12 Install the turnstile to the designate place and run the network cable and power cable inside the turnstile based on safety standards; Use screw nut to install the device to the turnstile; Screw nut Install the device with bracket...
- Page 13 Connect the network cable to the RJ45 Ethernet inter- face, connect the power to the DC power supply, connect the delay to delay interface, run all the cables into the turnstile; Adjust the elevation of the bracket for the best angle of recognition.
-
Page 14: 9-Basic Operation
9-Basic Operation 9.1 Topology Internet LAN/WLAN Router Relay signal TupuCheck Pro Entrance Guard 9.2 Staff Recognition & Interface Display Interface display for recognized staff Text Display Image Display Registered Staff “Recognition success” Registered image Unregistered Person No text Face detection frame... - Page 15 Indicator light Text-to-speech Color tag display audio prompt Interface display for temperature reading Text-to-speech Color Display Indicator Light prompt Normal Green Green “Normal temperature” (36℃ - 37.5℃) Low Fever Yellow Yellow “Low fever” (37.5℃-38.5℃) High Fever “High fever” (38.5℃ and above)
- Page 16 9.3 Personnel Management Operation by Administrator Step1: Log in through https://face-access. tuputech.com/login?lang=en with allocated account and password. Face Access https://face-access.tuputech.com/login Face Access Enter the account number Enter password Log in forget password Step2: Click on “Personnel” to the management page.
- Page 17 9.4 Add Devices In the “Organization” page, click on “Store Manage- ment” . Select the default device language. Click “Add region/store here”, input a name and set the type as “Store”, then submit Face Access Manage Captures Devices Passport User Group Personnel Alarm OPS Organization...
- Page 18 NewDevice General Name Product Model FaceAccess with Tablet PC Serial Number Click “Setting” to set up more details. Face Access (v1.8.55_20200411_checkin_bi) Setting Serial Number: - MAC: - Offline Product Model: Face Access VPN: 10.100.15.10 In the “Custom” page, set Recognition Success TTS as “#{name} {temp}”...
- Page 19 To use device with entrance guard or turnstile, click on the button to set up relay signal output. Face Access (v1.8.55_20200411_checkin_bi) Setting Serial Number: - MAC: - Offline Product Model: Face Access VPN: 10.100.15.10 Name it as “Relay and type as ”Internal Relay”, then submit.
- Page 20 9.5 Set Event Triggers In the page of “Event Trigger”, customer can easily set the conditions and events, to guide the device to have various reaction under different conditions. EditDevice General The trigger is the tool that customizing the behavior Advanced of the device for different situations.
- Page 21 EditDevice General Default Trigger Advanced All Conditions Matched Any Condition Matched Add Condition Custom Temperature 37.5 Less Than LowHigh Successfully Recognized Equal Extra Default Trigger Event Trigger Add Event Broadcasting Voice text： Cust... #{name} #{temp} Open the door Light Color： Green Cancel Example 2:...
- Page 22 EditDevice General Default Trigger Advanced All Conditions Matched Any Condition Matched Add Condition Custom Temperature 37.5 Less Than LowHigh Successfully Recognized Equal Extra Event Trigger Default Trigger Add Event Broadcasting Voice text： Cust... #{name} #{temp} Open the door Light Color： Cancel 9.6 Add New Members Step1: Click on the “Add member”...
- Page 23 Step2: In the “Add member” pop-up page, fill in the fields of “Name”, “Status (Person Type)”, “Affiliated Node”, “Comment”, and upload a photo, then click the button “Submit and save”. Face Access Manage Captures Devices Passport User Group Personnel Alarm OPS Organization Face Access Add member...
- Page 24 Sample Photo: 9.7 Delete Members In the “Personnel” page, click on the “Delete” button for specific person. Avatars Name Attributes Status Register time Comment Affiliated node Userld Action 2020/03/28 Camilla Female staff Headquarters-Face Access Edit Delete 11:02:08 2020/03/28 Simone Female staff...
- Page 25 Headquarters Serial Number： BB7J7DZ3Q2 MAC： 96:2b:58:15:5a:05 Online Setting Face Access Product Model： TupuCheck Pro VPN： 10.100.15.10 Relay 9.10 Capture Record & Report Export Customer admin and security can view the capture record page. Capture search function supports search- ing by name and picture ID.
- Page 26 Step1: select captures, select the required region, you can view the records of people in the selected range. Face Access Manage Captures Devices Passport User Group Personnel Alarm OPS Organization Face Access Region Company main entrance 2020-03-27 00:00:00 ~ 2020-03-28 23： 59： 59 Captures Filtering Add criteria...
- Page 27 Headquarters Serial Number： BB7J7DZ3Q2 MAC： 96:2b:58:15:5a:05 Online Setting Face Access Product Model： TupuCheck Pro VPN： 10.100.15.10 Relay No captures records Check the device status. If "Offline" is displayed, you need to check whether the current network environ- ment is normal and determine the connection between...
- Page 28 the network environment and the Internet; if "Online" is displayed, you need to restart the device. APP: not responding and cannot be recognized After powering off the device, re-apply power to restart the device. The device restarts normally under the condition of power supply and network and automati- cally starts the APP.
Need help?
Do you have a question about the TupuCheck Pro and is the answer not in the manual?
Questions and answers