Iontocure iD-200 Instruction Manual

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

Download this manual

Iontocure iD-200 Instruction Manual

Table of Contents

Need help?

Do you have a question about the iD-200 and is the answer not in the manual?

Questions and answers

Summary of Contents for Iontocure iD-200

Page 2: Table Of Contents
Iontocure iD-200 Instruction Manual Table of Contents PRODUCTION INFORMATION .......................... 1  Warnings ............................ 2  Contraindications........................2  Possible adverse effects ......................3  Indications for Use ........................3  Important Notice ........................3 CONTENT ................................. 4  iD-200 Controller ........................5 ...
Page 3: Production Information
Iontocure iD-200 Instruction Manual PRODUCTION INFORMATION  Warnings 2  Contraindications 2  Possible adverse effects 3  Indications for Use 3  Important Notice 3 Copyright © 2019, Iontocure - 1 -...
Page 4: Warnings
TV monitor, mobile phone, computer, radio or microwave, as such proximity may cause the machine to malfunction. Get the controller charged at least one time each month if it was leave unused Only use accessories recommended for use with the iD-200 as other accessories may cause damage to the machine. Contraindications Do not use this device if you have a suspected or diagnosed heart problems or epilepsy.
Page 5: Possible Adverse Effects
If you experience other side effects, please stop using the device and contact iontocure customer service. Indications for Use The iD-200 unit is indicated for use in the reduction of excessive sweating, not related to exercise or resulting from another underlying condition. Important Notice Iontocure assumes no liability for use of this equipment by untrained or non- licensed personnel.
Page 6: Content
Iontocure iD-200 Instruction Manual CONTENT The following accessories are including with the unit:  iD-200 Controller 5  Aluminum electrodes 5  Plastic briefcase 5  Banana plug cable 6  Universal adapter charger 6 Copyright © 2019, Iontocure - 4 -...
Page 7: Id-200 Controller
Aluminum electrodes The iontocure iD-200 use 5052-grade aluminum plates as electrodes. Note that discoloration of the metal plates is normal and it does not alter the treatment.
Page 8: Banana Plug Cable
Iontocure iD-200 Instruction Manual Banana plug cable 2.1mm*5.5mm male connector connects to the Controller, banana plugs connect to the electrode’s connectors The output current polarity was designed to switch automatically once hands or feet out of water, no need to switch polarity...
Page 9: Session Schedule
Iontocure iD-200 Instruction Manual SESSION SCHEDULE Most of the time, complete stop of sweating can be achieved after 7 days, but it may take up to 30 days. Start by doing a session of 10-15 minutes on each polarity every day at the highest comfortable level until you notice sweating has stopped.
Page 10: Maintenance Of Your Machine
MAINTENANCE OF YOUR MACHINE Iontocure device is only intended for single-patient use in home therapy. The cleaning procedure as per this section is sufficient. The device should be cleaned after each use as per the following procedure: 1.
Page 11 Iontocure iD-200 Instruction Manual Remove soap with a cloth. 7. Air dry the electrodes. 8. For towels: hand or machine wash with common detergent. Squeeze out water and air dry. Do not use any other cleaning method to clean your device. The provided cleaning procedure was designed to maximize the lifespan of the device.
Page 13: Treatment Sessions
How long should each Iontocure treatment last? Every use of the Iontocure machine should last at least 20 minutes up to a maximum of 30 minutes, making sure to take your hands or feet out of water on half time.
Page 14: Controller
Iontocure iD-200 Instruction Manual My hands and feet are dry, but the top of my fingers and toes are still sweating. What can I do? To make sure the top of your fingers and toes are dry, make sure they’re submerged under water.
Page 15 Iontocure iD-200 Instruction Manual Why do I have to take my hands (or feet) out of water on half way treatment? It helps you to switch the output current polarity automatically. Water How much water should I put in the case? Put in enough water to wet the skin on the palms of your hands or the soles of your feet, ensuring that the sweating area is wet.