Download Print this page

Para Mobility PELICAN POOL & SPA HOIST Installation Manual

Hide thumbs Also See for PELICAN POOL & SPA HOIST:

Advertisement

Quick Links

PELICAN POOL & SPA HOIST
INSTALLATION GUIDE

Advertisement

loading
Need help?

Need help?

Do you have a question about the PELICAN POOL & SPA HOIST and is the answer not in the manual?

Questions and answers

Summary of Contents for Para Mobility PELICAN POOL & SPA HOIST

  • Page 1 PELICAN POOL & SPA HOIST INSTALLATION GUIDE...
  • Page 2: Specifications

    PELICAN POOL & SPA HOIST Have the freedom to be active and enjoy the water! Designed and manufactured in Australia, it’s tested in accordance with ASA 3581. The Pelican Pool & Spa Access Hoist allows a person with any disability to have access to both above and below ground spas, swimming & Hydrotherapy pools - without manual lifting needed.
  • Page 3 CONCRETE PAD REQUIREMENT IMPORTANT: To safely install the Pelican Pool Hoist you will need a solid concrete pad to anchor it to. CONCRETE PAD INSTALLATION We recommend that approximately 1/3 of cubic metres of concrete is used when pouring your pad. This can be made up as a logical size, for example: 1000 x 1000 x 300 or 650 x 650 x 650.
  • Page 4 4 | www.activemobility.com.au...
  • Page 5 Pelican Pool Hoist | 5...
  • Page 6 6 | www.activemobility.com.au...
  • Page 7 Pelican Pool Hoist | 7...
  • Page 8 8 | www.activemobility.com.au...
  • Page 9: Tools Required

    To safely install the Pelican Pool Hoist you will need a solid INSTALLATION INSTRUCTIONS concrete pad to anchor it to. We recommend that approximately PELICAN POOL HOIST 1/3 of cubic metres of concrete is used when pouring your pad. This can be made up as a logical size, for example: 1000 x 1000 x 300 or 650 x 650 x 650.
  • Page 10 DRILL BRUSH INJECT ABRASIVE HOLE & BLOW & INSERT STUD NB. Tiles can be core drilled (16mm) for a cleaner / neater finish. 10 | www.activemobility.com.au...
  • Page 11 USER INSTRUCTIONS - PELICAN WHEELCHAIR Entering the water Place the client into the Pelican Wheelchair in the change room or desired location and wheel the chair to the pool hoist. Unlock the lifter travel pin on the pool hoist. Using the hand control, raise the hoist to above the client`s head and wheel the chair under the lifting hanger.
  • Page 12 USER INSTRUCTIONS - PELICAN FLOATING SLING Entering the pool Using the hand control, raise the Pelican lifter to well above the clients head, wheel the chair under the lifting hanger Slide the sling down behind the back of the client (the grab handle should be at the top, facing you) and tuck the bottom of the sling as low as possible underneath the buttock area (figure 1).
  • Page 13 USER INSTRUCTIONS - PELICAN FLOATING SLING Warning • Ensure that there are no obstacles in the path of the client being lifted. • Check that arms and legs are clear of obstructions. Failure to do so may cause injury. Figure 1 Figure 2 Pelican Pool Hoist | 13...
  • Page 14 LIFTING SLINGS OPTIONS General Purpose Slings General Purpose Slings are designed to be simple & safe to use for both home & institutional patient lifting. The slings are manufactured from polyester fabric or mesh (suitable for bathing) with internal padding in pressure areas. These slings utilise webbing attachment loops, which are colour coded for sizing to allow easy sling selection &...
  • Page 15 POOL HOISTS OPTIONS Kingfisher Pool Hoist The Kingfisher Pool Hoist, designed and manufactured in Australia, will allow access to a pool where traditional methods are not able to be used. Designed in close consultation with Occupational Therapists and other industry professionals, the Kingfisher Pool Hoist is a simple and safe operation that is both comfortable and dignified.
  • Page 16 Active Mobility Systems Unit 8, 110-120 Silverwater Rd., SILVERWATER NSW 2128 P: 02 9649 2111 F: 02 9649 8506 W: www.activemobility.com.au E: sales@activemobility.com.au...