What’s The Dongle; Installing The Dongle For A Usb Port; Installation Of Guardant Usb Driver - LSRM Guardant Stealth User Manual

The Dongle
What's the Dongle
1
Guardant USB dongle
use the dongles connected to the parallel port of the computer.
See the Guardant site http://www.guardant.com
dongle principles and operation.
Guardant dongle is a hardware device. Hence, it is not
guaranteed against faults. Follow the instructions below to avoid
many problems.
Note. The dongles support USB2.0 only.
2

Installing the Dongle for a USB Port

1. Guardant USB dongles can be used in operating systems that support USB standard.
2. Guardant USB dongles may be attached and removed when the computer is powered on or off.
3. Install the application software following the developers' instructions.
4. Install Guardant USB driver supplied with the application.
5. Reboot the system if necessary.
6. Attach Guardant USB dongle to an available USB port. If the dongle is attached before the driver has
been installed, cancel installation of the driver suggested by the operating system, remove the dongle and
install Guardant driver.
7. Make sure that the application is functioning properly.
3

Installation of Guardant USB driver

The window of GrdDrivers.exe utility for the
dongle driver installation
(Figure 3.B). This means that the driver has been installed successfully, and the operational system has
identified the dongle.
This is the final step of the Guardant driver installation.
© LSRM The Dongle. User's Manual.
Dongle is a device used to protect applications and data against
unauthorized usage and replication. If the dongle has correct
parameters, the application continues running. In case the dongle's
parameters are incorrect (a wrong dongle) or if it is not attached at all,
the protected application ceases its functioning.
Nowadays we
Guardant Stealth, Guardant
Sign dongles and the dongles
in the micro form
attached to the computer's
USB port. At present we don't
for details on the
use
factor
1. Run the executable file GrdDrivers.exe of
«Guardant
setup utility»
Guardant USB driver. This file is in the
X:\DongleDrivers folder, where X is the name
of your CD-ROM. Use the installation files
from the Drivers(x86)
directories, depending on your system, for
central installation of Guardant drivers in
Windows networks using group policies.
2. Attach Guardant USB dongle to an
available USB port.
3. The «Driver installation» of Windows starts
after the drivers have been installed and the
dongle is attached to a USB-port for the first
time. This is the standard procedure when the
Guardant driver is installing for Windows
(Figure 3.А).
4. The LED of the dongle switches on when
the required operations has been performed
1
to install the
or Drivers(x64)