Download Print this page
Phaze 594335 Manual

Phaze 594335 Manual

4 in 1 jump starter

Advertisement

Quick Links

USE OF THE 12V CiGARETTE LiGHTER SOCKETS
WARninG: Do not use this feature when the internal battery is being recharged.
These socket can be used for the operation of any 12V DC appliance (10amp maximum) fitted with
a cigarette lighter plug.
The use of this feature will discharge the internal battery so it may need recharging before jump
starting is possible. See above.
In the event of overload, remove the cigarette lighter plug from the socket and press the overload
reset button located on the rear of the starter pack.
USE OF THE 5V USB PORT
This port can be used for the charging or operation of any 5V DC appliance that uses a standard A
type USB plug. This may not be compatible with Apple and other devices. The LED next to the USB
port will illuminate when the USB port is in use. To activate this port press the button above. Press
again to deactivate.
Note:
• Always recharge this product indoors.
• Do not recharge in wet or damp conditions.
• Always use in a well ventilated area.
• Always keep this product in an upright position.
• Switch off when not in use.
• When switched on, do NOT allow red and black clamp metal parts to touch.
PRODUCT SPECiFiCATiOn
Charger Supply Voltage
230V 50Hz. AC
Output Voltage
12V DC through battery clips & cigar sockets
Output Voltage
5V DC 0.5A through USB port
Jump Starting Current
350 Amps (intermittent recommended max.)
Internal battery
17A/h
Cigarette Lighter Socket Output
12V DC, with automatic safety cut out
Recharge
12V DC / 500mA with automatic charge cut off
This product contains a sealed lead-acid battery which should not be tampered with and should be
disposed of at a recognised recycling facility or collection point.
DECLARATiOn OF COnFORMiTY
We declare that this product conforms to the following directives
2006/95/EC, 2004/108/EC, 2011/65/EU (ROHS), EN 61558-1:2005/A1:2009,
EN 61558-2-6:2009, EN 62233:2008, EN61000-6-1: 2007, EN61000-6-3: 2007,
EN 55014-1: 2006+A1:2009+A2:2011, EN 55014-2: 1997+A1:2001+A2:2008,
EN 61000-3-2: 2006:+A1:2009+A2:2009, EN 61000-3-3: 2008
3
4
Jump Starter
iMPORTAnT – CHARGE BEFORE FiRST USE – RECHARGE
AFTER EACH USE – RECHARGE EVERY 2 MOnTHS
in ORDER TO EnSURE CORRECT AnD SAFE USAGE OF
YOUR POWER PACK READ THESE inSTRUCTiOnS
CAREFULLY BEFORE EVERY USE
Phaze Tools produced for Halfords Ltd, B98 0DE.
Item Code: 594335
1
in

Advertisement

loading
Need help?

Need help?

Do you have a question about the 594335 and is the answer not in the manual?

Questions and answers

Mark LANCASTER
February 21, 2025

How long does it take to recharge

Summary of Contents for Phaze 594335

  • Page 1 EN 61558-2-6:2009, EN 62233:2008, EN61000-6-1: 2007, EN61000-6-3: 2007, YOUR POWER PACK READ THESE inSTRUCTiOnS EN 55014-1: 2006+A1:2009+A2:2011, EN 55014-2: 1997+A1:2001+A2:2008, CAREFULLY BEFORE EVERY USE EN 61000-3-2: 2006:+A1:2009+A2:2009, EN 61000-3-3: 2008 Phaze Tools produced for Halfords Ltd, B98 0DE. Item Code: 594335...
  • Page 2 Please contribute to battery recycling by segregating all spent batteries and actively participating COnTEnTS in their collection and recycling. Various battery collection schemes will be in operation in different areas of the country. However, battery collection bins will be available at retail stores that sell Page 1 General and Safety batteries as well as at schools, libraries and other public buildings.