Advertisement

Quick Links

A30
USER MANUAL
38
DIR
AUX
Analog input

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the A30 and is the answer not in the manual?

Questions and answers

Summary of Contents for Loxjie A30

  • Page 1 USER MANUAL Analog input...
  • Page 2 Introduction The A30 is a power amplifier with amplifier and headphone amp from Loxjie brand.The A30 uses professional chips from Infineon Germany, with high efficiency and good sound quality. At the same time, elaborate design and adjustment circuit are adopted.
  • Page 3 Output mode............6.35mm headphone , speaker THD+N (A-weighted)................0.003% SNR(A-weighted):...................108dB Output power: amplifier..............80Wx2(4Ω) , 40Wx2(8Ω) headphone amp..............100mW×2(32Ω) Power Consumption ........35W(normal power amplifier volume) Standby power ..................<0.5W Size ..............151 X 170 X 38mm(WxHxD) Package dimensions..........294 X 232 X 88mm(WxHxD) Weight ....................520g Support http://www.loxjie-audio.com/...
  • Page 4 Remote control Note: Install 2 x AAA batteries as instructions. When using the remote control, point it toward the remote con-trol signal receiver on the main unit from a distance of 5 m (16 ft) or less. Do not place obstructions between the main unit and the remote control.
  • Page 5 * Bluetooth pairing method: turn on the Bluetooth pairing on the phone, search and select "LOXJIE BT5.0B", if the phone displays "connected", it means that the pairing is successful, if the pairing is not successful, please operate the Bluetooth clear function, connect the Bluetooth connected before A30 After clearing, try again.
  • Page 6 Function and operation instructions Multi-function knob: Long press the knob to turn on/off, short press the menu knob left and right for volume adjustment/switch menu function Main Display: Digital volume indicator Sound display Input selection display Sampling rate will be displayed when Connected Bluetooth\Optical\Coaxial input.
  • Page 7 Function and operation instructions OUTPUT OUTPUT SETTING: Speakers Headphones Speakers Headphones EQ SETTING: Direct Direct Tone Tone Bass Bass Super Bass Rock Super Bass Soft Rock Clear Soft Clear TREBLE TREBLE TUNE: -10dB~+10dB BASS TREBLE TUNE: -10dB~+10dB Note: When the EQ is Driect or other EQ mode, adjust the treble or bass, the EQ mode will automatically switch to the state of Tone.
  • Page 8 Function and operation instructions COLOR: COLOR White White Green Green Blue Blue Yellow Yellow Cyan Orange Cyan Purple Orange Purple BT List clear: BT list clear Turn to clear BT Cleared! (The paired device was cleared!) Turn to Clear (Press the "up" or "down" buttons of the remote control to clear paired device.) DIMMER Dimmer :...

Table of Contents

Save PDF