Summary of Contents for Quirky Bubba Sienna Cot
- Page 3 PART 2 PART 1 PART 3 PART 4...
- Page 4 PART 5 PART 6 14 X SCREWS 1 X L KEY...
- Page 5 Start by attaching parts 1 and 3 together using 2x screws, secure the parts together by inserting the screws through the holes in part 1 PART 3 and into part 3. PART 1 Make sure to line up the letter A on part 1 to the letter A on part 3.
- Page 6 PART 1 Attach part 1 to part 4 using 2x screws, screwing them through part 1 into the screw holes provided in part 4. PART 4 Make sure to line up the letter D on part 1 to the letter D on part 4.
- Page 7 Place the cot on its side like in the photo. Then insert part 6 in at the bottom of cot and secure to parts 1 and 2 using 4x screws through the holes provided. PART 6 Insert Part 5 into the Cot, resting on the mattress base holders in each...
- Page 8 Remove Part 4 by unscrewing 5 x screws from Parts 1, 2 and 6. The cot may come with the mattress base holders attached, they are on the lowest setting and they are removable. To put them on the highest setting unscrew the screws and move them up to the new born setting.
- Page 9 Insert Part 5 into the Cot, resting on the lowest mattress base holders in each corner of the Cot for the toddler bed setting. PART 5...
Need help?
Do you have a question about the Sienna Cot and is the answer not in the manual?
Questions and answers