Advertisement
Quick Links
Advertisement
Summary of Contents for Munchies Vibe
- Page 1 The Future of Predictability INSTRUCTIONS FOR USE...
- Page 2 VIBE is used to assist in seating thermoplastic orthodontic aligners ® or retainers. MUNCHIES VIBE is also used to ensure that orthodontic tooth movements occur as predictably and comfortably as prescribed by your Doctor. You may experience excessive saliva production during use. Contraindications: None known Warnings: Use of excessive pressure to seat the aligners or retainers may cause damage to either the device or the aligners.
- Page 3 Hub Plug in the USB cable to the back of the case and Lights indicate the speed the VIBE is on (choose 1, 2, or 3) connect the USB cable to a USB adaptor or USB Select the Anterior Nodular Attachment to begin port (computer/powerboard).
- Page 4 MUNCHIES VIBE ® components Lower Grooved Posterior Attachment Nodular Attachment Anterior Vibrating Nodular Upper Attachment Grooved Attachment Page 4...
- Page 5 Nodular Attachments Vibrating Hub Grooved Attachments Gently press the - Anterior center of the Hub - Large grooved to turn on the attachment for device. attachment for your front teeth your upper teeth (upper and lower) 2 min timer - Small grooved - Posterior attachment for attachment for...
- Page 6 Gently guide the How to connect the attachments attachments onto the Hub arms Select any attachment from the tray and connect to the Hub by gently guiding it over an arm. All attachments fit on any of the Hubs’ three arms. Attachments can be easily removed by gently holding the attachment and disconnecting it from the Hub.
- Page 7 2 mins. Repeat again. Note: VIBE is on an automatic 2 min timer. Posterior Nodular Attachment As shown in the image to the right, on one side of your...
- Page 8 How to seat your aligners with Munchies EPS With your aligners in place, put the ridged end With your aligners in place, put ® of the Munchies EPS between your upper and your top teeth into the bigger lower back teeth on one side of your mouth and ®...
-
Page 9: Important Safeguards
® tips if your MUNCHIES VIBE no longer works properly. Never force the plug into an outlet; if it does not easily 2. Never use the charger if it has a damaged cord or fit into the outlet, discontinue use. -
Page 10: Medical Warnings
There is a risk of manufacturer. strangulation with the UBS cable. ® 3. Munchies VIBE has been tested and is compliant with ® 6. MUNCHIES VIBE is a personal care device and is safety standards for electromagnetic devices. - Page 11 VIBE cannot be can cause damage to them. Premature tearing is generally ® replaced, at the end of the life of the MUNCHIES VIBE, due to overuse or too great a force being applied. please hand in at an official collection point for recycling.
-
Page 12: Troubleshooting
TROUBLESHOOTING 1. The device does not start Ensure you have charged the device for at least a few hours, and you are applying enough pressure in the center of the Hub to activate the vibration. 2. Why are there 3 speeds? The device offers 3 different speeds so patients can select a speed that they find comfortable. -
Page 13: Customer Service Information
Australia ph: 1300 688 565 Manufacturing Quality ® The Munchies VIBE device has been manufactured using FDA approved biocompatible and medical grade plastics, pigments and silicones. ® The Munchies VIBE has been designed in Australia and is manufactured in China. Page 13... - Page 14 BLANK PAGE Page 14...
- Page 15 BLANK PAGE Page 15...
- Page 16 Manufacturer: EOCA MD Pty Ltd - 16 Transvaal Avenue, Double Bay NSW 2028 Australia Sponsor: David Penn Consulting Pty Ltd - 16 Transvaal Avenue, Double Bay NSW 2028 Australia EU Rep: MT Promedt Consulting GmbH - Altenhofstrasse 80, 66386 St. Ingbert, Germany Distributors: Esthetic Orthodontic Company of America LLC , www.eocamerica.com 2860 Scherer Drive North, Suite 650 St.
Need help?
Do you have a question about the Vibe and is the answer not in the manual?
Questions and answers