Table of Contents
Advertisement
4
2.2. Turning GPR On
1) Turn ON the GPR using switch ON/OFF on control panel. The red light-emitting diode will
light up.
Prism2
2) Turn on the computer and install the
software package onto a hard disk using the
flash USB disk supplied with the kit. The installation process is described in the User's Manual
Prism2
for
program. Once the installation is completed, you must perform the actions
prescribed by the Manual in paragraphs 5.1 and 5.2 "Configuring the computer to connect with
Zond-12e GPR Control Unit" and paragraph 6 "What to Do Immediately After Installation".
Prism2
3) Run
program. Main menu as below appears on computer screen.
Prism2
Fig. 3. Main menu of
software.
4) Click on Start menu item. Data acquisition menu as below appears on the screen.
Fig. 4. Data acquisition menu.
Advertisement
Table of Contents
Need help?
Do you have a question about the Zond-12e and is the answer not in the manual?
Questions and answers