Megacom Pocket Dual Catchmon User Manual

AUTO
Auto-collecting items
walking for hatching Eggs
1P/LED status light/
function key
2P/LED status light/
function key
Hanging hole
Two alkaline AAA batteries
(not included) to be inserted
in battery compartment in strap
How to connect Catchmon with phone for first time
Insert two AAA batteries and DualCatchmon will automatically start. 1P and 2P will flash
green several times and enter work mode before
User Manual
AUTO
Auto-catching Pokemon
Kill two birds with one stone
Dual accounts can be used.
AVAILABLE DEVICES
One-click connection
Automatically replenish and capture,
and XP
earn stardust, candy,
600 hours of standby powe
Goes into sleep mode when
disconnected, with up to 600 hours
AVAILABLE DEVICES
of standby power, alkaline AAA
batteries recommended
.
Capture time delay function
Built-in unique function captures
setting necessary.
time delay. No
connection.
Main Menu
2.Go to Pokemon Go and click
"Main Menu"
3.Click "Settings" in upper right corner
Settings
4.Go to bottom and click
"Pokémon Go Plus". Two
available devices (Catchmon 1P
and 2P) are shown below.
A green light will ash
in Catchmon before it
connects with phone.
5.Press Catchmon 1P or 2P. A light
will appear at the center of
available device in phone. Click on
desired device on phone to start
connecting with Catchmon.
6.After successful connection,
available devices on the app will
AVAILABLE DEVICES
light up like the graph.
If Catchmon had successfully connected with
phone before and signal is lost, LED will be blue
and flashing. To reconnect, simply click Go Plus
icon at top right in phone app map. (Purple light
Connecting to Pokémon Go Plus...
flashing if connection successful)
To connect with new phones, first delete old Catchmon connection.
Methods are indicated as follows.
Catchmon tips
1. Catchmon's built-in random delay capture time.
2. If bag is full and cannot collect items from Pokestop,
NOTIFICATIONS
first deactivate "Nearby Pokestop" notification in Go Plus.
3. If out of red Pokeballs and temporarily cannot capture,
first deactivate "Nearby Pokémon" notification in Go Plus.
Alternate and make it easier to collect, capture,
and acquire stardust.
LED will be purple and
flashing when Catchmon is
connected .
NOTIFICATIONS
Nearby Pokemon
Nearby Pokestop