Download Print this page
Huawei CR-SRUB Specifications
Huawei CR-SRUB Specifications

Huawei CR-SRUB Specifications

Quidway netengine 40 series universal switching router route switching units

Advertisement

Quick Links

Quidway® NetEngine 40 Series Universal Switching Router Route Switching Units
Quidway® NetEngine 40 Series Universal
Switching Router Route Switching Units
Overview
The Route Switching Unit (SRU) is the core of the Quidway® NetEngine 40 universal
switching router (USR) series (abbreviated as NE40).
NE40-8 and NE40-4 provide 2 slots, where one or two SRUs can be located. It is suggested
that you configure two SRUs in order to implement SRU redundancy and enhance system
reliability. NE40-2 has only one SRU slot, so it does not support SRU redundancy.
CR-SRUB
CR-SRUE
When the active SRU runs normally, the standby one is backing up such information in real
time as data configuration and status of slot, board, interface, power, fan and protocol. When
the active SRU is seriously faulty or is reset manually, the system restores services on the
standby one (automatically or by command). Meanwhile, it generates an alarm and records
the switchover cause and process in the log file which will be notified to the NMS.
Copyright ©2007 Huawei Technologies Co., Ltd. All rights reserved.
1
http://www.huawei.com/products/datacomm/

Advertisement

loading

Summary of Contents for Huawei CR-SRUB

  • Page 1 SRU is seriously faulty or is reset manually, the system restores services on the standby one (automatically or by command). Meanwhile, it generates an alarm and records the switchover cause and process in the log file which will be notified to the NMS. Copyright ©2007 Huawei Technologies Co., Ltd. All rights reserved. http://www.huawei.com/products/datacomm/...
  • Page 2 Enable synchronization performance detection, alarming and control. Specifications At present, the NE40 provides three types of SRUs, including CR-SRUB, CR-SRUC and CR-SRUE. Compared with first-generation SRUs of CR-SRUB and CR-SRUC, CR-SRUE demonstrates much better performance. CR-SRUB and CR-SRUE are applicable to NE40-8, NE40-4 and NE40-2, while the CR-SRUC is only applicable to NE40-2.
  • Page 3 CR-SRUE port CONSOLE port AUX port CLK-IN1 CLK-IN2 CLK-OUT1 Copyright ©2007 Huawei Technologies Co., Ltd. All rights reserved. http://www.huawei.com/products/datacomm/ Interface Description type Connect the NM station. This interface is 10/100 Mbps adaptive and supports a RJ45 maximum transmission distance of 100m. It is configured with LINK and ACT indicators.
  • Page 4 Quidway® NetEngine 40 Series Universal Switching Router Route Switching Units Module Interface Interface Description name type name signals to downstream devices. CLK-OUT2 Copyright ©2007 Huawei Technologies Co., Ltd. All rights reserved. http://www.huawei.com/products/datacomm/...

This manual is also suitable for:

Cr-srueCr-sruc