KUPPET 1022101300 Instruction Manual page 27

Ice cube is very thin
Ice cube is too thick
"ICE-FULL" symbol is
on
Ice making cycle is
normal, but there is no
ice cube produced
Ambient temperature is too
high
Air circulation around the unit
is not goog
Ambient temperature is too low Reduce the time of each ice making cycle.
The ice storage bin is full of the
ice cube.
The temperature of ambient, or
water in water tank is too high
Refrigerant leakage, E2 error
code display
Cooling system tube is clogged
Move the unit to low temperature space, or
lengthen the time of each ice making
cycle.
Make sure there is more than 20CM space
between the unit back & front and the
obstacle
Take out some ice cube
Move to the place with temperature lower
than 32 centigrade, and change to the low
temperature water
Need the technical serviceman to maintain
Need the technical serviceman to maintain
26