Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for SANTI Heated Undersuit BZ400
Summary of Contents for SANTI Heated Undersuit BZ400
- Page 1 User Manual...
-
Page 2: Table Of Contents
SANTI Heated Gloves 2.0 5.01 Product specification 5.02 Our prime goal at SANTI is to keep the divers dry, warm and comfortable in their diving Size table 5.04 equipment. SANTI heated range was created to extend your diving time limits with the... -
Page 3: General Informations
Correct fitting of the heated underwear gives much more comfort and satisfaction during use. Fitting should be carried out when wearing suitable underwear and an appropriate undersuit. Size should be based on the size chart. We recommend using our autorised SANTI dealer. SANTI Sp. z o.o. -
Page 4: Warnings
Serial number is stated on the inside label. SANTI reserves the right not to carry out repairs under warranty if any original information is removed or modified on the product after the original date of purchase of the product from a... -
Page 5: Complaints
If you notice any mechanical break or cut, do not use • SANTI reserves at any time the right to modify the product characteristics or functions of this product without advance notice. the product for diving, as this might cause serious problems and •... -
Page 6: Santi Bz400 Heated Undersuit
2.01 2.02 The innovative SANTI BZ400 Heating undersuit is designed as a part of the complex heating system consisting of at least an undersuit, thermovalve/connector and an external battery canister. This configuration allows a diver to wear the undersuit under the drysuit without additional valve and dangers associated with internal batteries. -
Page 7: Size Table
• warms up the whole torso, thighs and arms, • extra pocket for the wire ends, • waterproof plug, compatible with other SANTI products, flexible and overheating resistant wires, additional. Wires integrated to plug in the heating gloves in standard, •... -
Page 8: Santi Heated Undersuit Flex 2.0
3.01 3.02 The Flex 2.0 heating undersuit is designed as part of complex Santi heating system which consists of such items as heated undersuit or heated vest, valve thermoconnector or thermovalve and external battery. This configuration allows a diver to use the heating system without necessity of using any additional valves and without any dangers associated with internal battery canisters. -
Page 9: Size Table
• special undersuit bag, • available for ladies in “Made to Measure” option. ATTENTION! Works only with SANTI thermovalve and SANTI connector. Washing instruction: Machine-wash in cold water at short cycle at the temp. of 40°C. Hand washing is not recommended since it is difficult to work the water into and through the undersuit to flush away dirt and to remove the water manually without damaging the insulation and cables inside. -
Page 10: Santi Heated Vest Flex 2.0
Product specification 4.01 4.02 Santi heating vest is a product for those who seek the highest level of comfort during long and cold dives. New Flex 2.0 heating vest, designed as part of Santi heating system which consists of such items as heated undersuit or heated vest, valve thermoconnector or thermovalve and external battery. -
Page 11: Size Table
• battery running time: SANTI 6Ah: ~ 1h30min of heating, SANTI 24Ah: ~ 5 - 6h of heating, • safety switch preventing from overheating and too strong current, • new generation of heating wire covered with ultra-soft, silicone isolation resistant to breaking, •... -
Page 12: Santi Heated Gloves 2.0
SANTI Heated Gloves 2.0 Product specification 5.01 5.02 The Heating Gloves are designed as a part of the complex heating system consisting of the gloves, thermo valve/connector and an external battery canister. This configuration allows a diver to wear the gloves under the dry gloves without additional valve and dangers associated with internal batteries. -
Page 13: Size Table
• evenly distributed heating wiring that allows for freedom of movements in palms, • wires on fingers and outer side of palm, • waterproof plug, compatible with other SANTI products, • works with power supply no higher than 12V. ATTENTION! Works only with SANTI thermovalve and SANTI connector. -
Page 14: Instruction For Use
Instruction for use 5.05 • Conduct the cables of the gloves against your arms and to the connector and then connect • Connect the supplied wire to valve cable and put the gloves connecting cables into the sleeves. the gloves. •... -
Page 15: Santi 24Ah Battery
Product specification 6.01 6.02 SANTI battery is developed based on modern Li-Ion cells, with high current efficiency. Battery is designed to supply power to SANTI heated apparel (undersuit, vest, gloves). However, it may be also used with diving lights. Total power of connected devices must not exceed 200W. Those devices must be designed to be powered with 10.8-12V input. - Page 16 • 3 flashes of LED stand for 60%-100% • 2 flashes of LED stand for 30-60% Battery should be connected to heated apparel with use of SANTI connector or SANTI • 1 flash of LED stands for < 30% thermovalve by the E/O cord connector. If battery is not in use, battery should be switched off •...
- Page 17 • SANTI DIVING is not responsible for any damage or loss which are result of inappropriate use of the battery or charger, especially against above recommendations.
-
Page 18: Santi 6Ah Battery
The battery is designed to work with a vest and gloves from the SANTI heating system range. There is also the possibility to use the battery with any torch if its power does not exceed 100W. - Page 19 Connecting the charger to fully or partially discharged battery is indicated by a red LED light on • the possibility of using for both the SANTI heating system and lights. the charger. When the battery is fully charged, the LED light on the charger will turn to green.
- Page 20 • SANTI DIVING is not responsible for any damage or loss which are result of inappropriate use of the battery or charger, especially against above recommendations.
-
Page 21: Santi Connector And Double Connector
System componennts under the drysuit. • contains two electrical connectors on opposite sides of the cable - a battery connector adapted to wotk in water (standard E/O cord) and a water resistant connector for SANTI Heating System componennts, • product dedicated to work with battery power not higher than 12V, •... -
Page 22: Instruction For Use
Instruction for use 8.03 • Turn the suit so the inside part is visible and put the connection cable through the nut that • Prepare all separate parts that are included in the box. Detach your inlet valve and disconnect will hold the valve. -
Page 23: Santi Thermovalve
• Made of two opposing cords - used to connect with battery, adapted to operate under water and to connect with SANTI Heating System garment. • Works with powet supply no higher than 12V. • Total length of the cables including plugs - about 55cm. - Page 24 SANTI Thermovalve works as any inflation valve but since it is additionally equipped with to the outside of the suit with a suitable adhesive. When positioning the valve try to ensure the integrated, waterproof voltage connection it enables to connect heated underwear to the that it won’t be covered by other pieces of diving equipment, affecting access to the valve.
-
Page 25: Instruction For Use
Instruction for use 9.05 • Turn the suit so the inside part is visible and put the connection cable through the nut that • Prepare all separate parts that are included in the box. Turn off your inlet valve and disconnect will hold the valve. - Page 26 Warranty Card...
Need help?
Do you have a question about the Heated Undersuit BZ400 and is the answer not in the manual?
Questions and answers