Vedeneyev M-14P Maintenance Manual page 137

OPERATIONS AND TECHNICAL REQUIREMENTS
11. Unlock and undo the oil system pipelines.
12. Disconnect wires from the generator, thermocouple of the cylinder rear spark plug, wires
of the tachometer generator.
13. Unlock and disconnect the carburetor throttle control rod.
14. Suspend the engine by a hoist on a special cable secured to the shackle and two upper
points of the engine frame (Ref. Fig. 401).
15. Lift the engine so as to relieve studs (5) (Ref. Fig. 402) of engine frame ring (4).
16. Unlock and undo nuts (2) of the engine frame ring studs. 17. Drive out the
studs by a special drift with an end—piece.
18. Separate the engine from the airplane by moving the engine forward or the airplane
backward.
NOTE: When removing the engine, pay attention so that the ignition cable sheath and
accessories are not damaged.
19. Install the engine on the support and secure it. 20. Preserve the engine
(Ref. Section "Storage Instructions"),
CHECKED
CORRECTIVE ACTIONS
BY
150