File→Load Object - HP 68302 User Manual

File→Load Object... (ALT, F, L)
Loads the specified object file and symbolic information into the debugger.
Program code is loaded into emulation memory or target system RAM.
Object files must be IEEE-695 format absolute files. Some software
development tools that generate this format are:
Microtec MCC68K Compiler
Microtec ASM68K Assembler
Microtec LNK68K Linker
HP AxLS CC68000 Compiler
HP AxLS AS68K Assembler
HP AxLS LD68K Linker
You can also load Motorola S-Record and Intel Hexadecimal format files;
however, no symbolic information from these files will be loaded.
Load Object File Dialog Box
Choosing the File→Load Object... (ALT, F, L) command opens the following
dialog box:
Chapter 8: Menu Bar Commands
File→Load Object... (ALT, F, L)
219