Electrolux EFP/W-1100ULS EEC User Manual page 9

• Press the key. The minute digit starts
blinking.
• Press the + or – key to set the minute.
• Press the key to set the off time. The
hour digit starts blinking.
• Press the + or – key to set the hour.
• Press the key. The minute digit starts
blinking.
• Press the + or – key to set the minute.
• Press the key. The temperature digit
starts blinking.
• Press the + or – key to set the temperature.
• Press the key to continue with the
timer setting or press the
confirm the setting.
Viewing the timer setting
• Press the key.
• Press the + or – key to check the power-on
time of the set timers one by one.
• To check the power-off time, press the ▲
key.
• Press the + or – key to check the power-off
time of the set timers one by one.
To delete selected setting, press the C key.
Activation timer
Press the key to activate the
function.
Note:
When the timer is active, the heating level
must be manually selected. If the heater
function is not selected only the flame
effect goes on at the set power-on time.
Open window detection
• Press the
window detection function. The
icon appears on the display.
• The icon on the display starts
blinking and the heater stops heating if
room temperature drops quickly. Press
the key again to cancel open
window detection.
key to
timer
key to activate open
Note:
Open window detection does not work if
you have not turned heating on.
Note:
Make sure to match the polarity of the
batteries with the markings inside the
battery compartment.
9
ENGLISH