Advertisement
Advertisement
Table of Contents
Summary of Contents for Celestion C-MUSIC BA28
- Page 1 BA28 Portable Busking and Music System...
- Page 2 Important Safety Instructions! for best performance only! It is prohibited to use “patched The system’s load-bearing capacity cannot be guaranteed and fuses” or to short the fuse-holder. Replacing any kind of the manufacturer will not be liable for damages in the event Read before connecting! fuses must only be carried out by qualified service personal.
-
Page 3: General Information
C-Music By Celestion - BA28 1 General Information 1.1 Unpacking and Inventorying When you first unpack your BA28, take a quick inventory to make sure the package comes complete with all the contents. A power supply unit, two battery packs are included. -
Page 4: Connections And Control Features
Its LED lights up green when the cabinet simulator is the device. on. Press once more to deactivate. • BT (Bluetooth) / Aux In The free BA28 Remote app offers three types of signature Celestion Pairing speaker drivers simulation: This button activates the pairing process that connects BA28 to •... - Page 5 C-Music By Celestion - BA28 2.2 Rear Panel Aux In Service Use this stereo 1/8” (3.5mm) mini jack to patch in a stereo line signal, This USB interface is used for service purposes. For updating the for instance, from a tablet / phone, mixing console or keyboard (with firmware of BA28, connect PC or Mac Computer to this port with an appropriate cable).
- Page 6 BA28 promptly switches to the battery pack in slot B when the battery • Select “C-Music BA28 XXXX” on the Bluetooth device to pack in slot A is depleted. pair the devices...
-
Page 7: Technical Specifications
8 x 3 x 8.3 cm Weight 0.25 kg / 0.6 lbs If factory reset is needed, press and hold both Celestion IR and BT Charging time in BA28 Around 5 hours Pairing button for at least two seconds. Both LEDs will flash to indicate the factory reset and BA28 will switch off automatically.
Need help?
Do you have a question about the C-MUSIC BA28 and is the answer not in the manual?
Questions and answers