Advertisement
Quick Links
Advertisement
Related Manuals for iBell IBL SG60-26
Summary of Contents for iBell IBL SG60-26
- Page 1 HVLP HAND HELD SPRAY GUN IBL SG60-26...
-
Page 3: Table Of Contents
TABLE OF CONTENTS 1. GENERAL POWER TOOL SAFETY WARNINGS __________ 2. SPRAY GUN SAFETY WARNINGS _______________________ 3. PRODUCT OVERVIEW _________________________________ 4. PRODUCT SPECIFICATIONS ___________________________ 5. PRODUCT FUNCTIONS AND ASSEMBLY________________ 6. GENERAL OPERATION ________________________________ 7. TROUBLESHOOTING __________________________________ IBL SG60-26... -
Page 4: General Power Tool Safety Warnings
Keep it away from heat, oil, sharp edges or moving parts. When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock. IBL SG60-26... - Page 5 When servicing a power tool, use only identical replacement parts. Follow instructions in the maintenance section of this manual. Use of unauthorized parts or failure to follow maintenance instructions may create a risk of shock or injury. IBL SG60-26...
- Page 6 Injuries and damage to property due to broken cutting attachments or the sudden impact of hidden objects during use. Danger of injury and property damage caused by other objects or due to natural reactions or calamities. IBL SG60-26 IBL DS80-70|90...
-
Page 7: Spray Gun Safety Warnings
Before any work (such as transport, construction, conversion, cleaning or maintenance) and when the product is not being used, disconnect it from the power supply and empty the paint container. IBL SG60-26... -
Page 8: Product Overview
PRODUCT OVERVIEW 5. ON/OFF Trigger 1. Air Cap + Nozzle 6. Air Filter 2. Union Nut (inside) 7. Paint head 3. Lock button 8. Paint reservoir/tank 4. Flow rate control IBL SG60-26... -
Page 9: Product Specifications
By twisting the Flow adjustment knob, the flow rate can be controlled for smooth and even application. With its detachable design, all parts of the spray gun can be detached easily and is convenient for you to clean the parts after spraying. IBL SG60-26... -
Page 10: Product Functions And Assembly
For thicker materials, it is recommended that you start with the highest material flow setting and then gradually decrease the flow to suit your spraying needs. For thinner materials, start with a low material flow setting, and then gradually increase the flow to suit your spraying needs. IBL SG60-26... - Page 11 For changing nozzles, Loosen and remove the union nut (2) and air cap (1) from the paint head. Remove the nozzle and replace with the desired size. Tighten the air cap onto the paint head to secure the nozzle. IBL SG60-26...
-
Page 12: General Operation
Position the spray gun should be perpendicular to and 10-30 cm from the spray surface, depending upon the spray pattern size desired. With reduced material flow and air power, you can get closer to the spraying surface. 10-30 cm IBL SG60-26... - Page 13 Time how long it takes to empty the cup (referred to as DIN seconds). If the material is above 60 DIN-sec the material will need to be thinned more and re-tested. Viscosity Cup Thinner Paint IBL SG60-26...
- Page 14 Keep the vents of the spray gun clean at all times. If possible, prevent foreign matter from entering the vents. Clean the paint tank and suction tube with a brush. IBL SG60-26...
-
Page 15: Troubleshooting
4.1 Container material 4.1 Refill the material. running out. 4. Spray jet pulsates 4.2 Change the filter. 4.2 Air filter clogged. All further inspection and repair work must be WARNING! performed by an authorised service centre or a qualified technician! IBL SG60-26... - Page 16 Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your Local Authority or local store for recycling advice. Do not dispose this product by normal household waste, but take it to a collection point and recycling of electrical and electronic equipment.
Need help?
Do you have a question about the IBL SG60-26 and is the answer not in the manual?
Questions and answers