Panasonic ET-PNT100 Operating Instructions

Names
Rod
Infrared Emitter
Bofore using the pointer
Screw the long rod into the body of the pointer
until it is secure. Install batteries.
How to use the pointer
While pressing the button, when the LED lights,
the infrared ray at the end of the rod also lights.
This is sensed by the infrared ray sensor on the
front of the projector, and the location of the tip of
the pen is detected.
1) Press the power button to turn the power on.
2) Place the tip of the pointer anywhere on the
screen.
Disposal of Old Equipment
Only for European Union and countries with recycling systems
This symbol on the products, packaging, and/or accompanying documents means that used
electrical and electronic products must not be mixed with general household waste.
For proper treatment, recovery and recycling of old products, please take them to applicable
collection points in accordance with your national legislation.
By disposing of them correctly, you will help to save valuable resources and prevent any
potential negative effects on human health and the environment.
For more information about collection and recycling, please contact your local authority.
Penalties may be applicable for incorrect disposal of this waste, in accordance with national
legislation.
Panasonic Connect Co., Ltd.
Web Site : https://panasonic.net/cns/projector/
© Panasonic Connect Co., Ltd. 2022
LED Power button
Button
Operating Instructions
Interactive Pointer
Model No.
Thank you for purchasing this Panasonic product.
• Before using this product, please read this
instructions and "LightPenII: Operation Manual"
completely, and save this manual for future use.
3) Pressing the button once has the same
function as left-clicking a mouse. Press and
hold the button to drag. In pen mode, you can
draw lines.
Attention
On status will consume battery power. When not in use,
press the power button to turn the power off. (Press the
button to confirm that the LED does not light.)
Installing and Removing Batteries
1. Rotate the part as shown in the figure.
2. Install 2 AAA/R03 or AAA/LR03 type batteries.
*Remove the batteries in
the reverse order of installation.
Product Information (for Turkey only)
AEEE Yönetmeliğine Uygundur.
Commercial Use
ET-PNT100
ENGLISH
Printed in Taiwan
1LG6P1P1024-- (IJDV)
TQZJ712-2