Table of Contents
Advertisement
1. Modify the /usr/pcs/etc/xinitcolor le according to your graphics and applications. For
example, if your HP 4062UX system is furnished with a color display and has the HP
IMA/UX software, edit the /usr/pcs/etc/xinitcolor le as follows:
1
1
1
### system.
### For 4062UX on Color display system
#/usr/bin/X11/xinitcolormap -c 16 . . .
1
1
1
### For IMA/UX
/usr/bin/X11/xinitcolormap -f /u . . .
If your system is in a diskless cluster, perform this step for server and each diskless
cnode.
2. Copy the X11 environment le \
permission as follows:
# cp /etc/newconfig/rmb/d.Xdefaults /.Xdefaults
# chmod u+rw .Xdefaults
3. Copy an X11 startup le \
as follows:
# cp /usr/pcs/newconfig/d.x11start /.x11start
# chmod u+rwx .x11start
10. Execute the following commands for X11 colormap database setup.
For color display:
# cat /etc/newconfig/rmb/rgb.rmb >> /usr/lib/X11/rgb.txt
# /usr/bin/X11/rgb < /usr/lib/X11/rgb.txt
For gray scale display:
# cat /etc/newconfig/rmb/gray.rmb >> /usr/lib/X11/rgb.txt
# /usr/bin/X11/rgb < /usr/lib/X11/rgb.txt
11. Start X Window.
Enter as follows:
# x11start
12. Setup codewords by performing
Enter as follows:
# /usr/pcs/etc/addcodeword
Then follow the displayed instructions.
If your system is con gured in a diskless cluster environment, you must perform this step
for each diskless cnode and server.
The HP 4062UX/F system uses the HP \Codeword Delivery" security scheme. A codeword
consists of 16 characters. It is used in conjunction with the HP 46084A ID Module.
1
1
1
1
1
1
1
1
.Xdefaults
" for the HP 4062UX, then change the permission
.x11start
addcodeword
1
1
(
Remove #.
" for HP BASIC/UX, then change the
.
Software Installation 5-11
Advertisement
Table of Contents
