1
®Press the time button 1®J
©
, t h e c h a r a c t e r s
flashes, and then press
or Save button
to set hours and minutes;
t^1to set the currently feed on*^' or off fi.
,setting the following meals.
●Press the Enter key tJto complete setting,then the indicator stops flashing.
●long press the record button
then press display button
the plus button
Intelligent Automatic Pet Feeder
U s e r ' s I n s t r u c t i o n
®Press the key
E ]
●Press the Set button
[ 3
to start recording, release it to stop recording.
to display.
(When recording, place mouth position as close to the microphone as possible to
speak loudly, it can record up to 12 seconds.
●Manual Feeding: Long press the manual key! 1
manual feeding.
f o r a b o u t 2 s e c o n d s t o s t a r t
P r e c a u t i o n s
>If this product is not used for long-term, please turn off the power switch and
remove the battery, to avoid electrolyte leakage.
>Wipe it with clean water or soft cleaning aent, after wipping it need to be
completely dry before installing each component.
>Dont rinse the product direcely under the water to avoid leakage and damage
t h e b o a r d .
>Use asoft cloth to wipe the surface of the product.
>Dont disassemble components which can not be removed.
>Indicator: flashing green means set state, flashing red means the weak power
state (you need to replace high-quality alkaline batteries).
>After re-energized or replace the battery, you need to reset the current time
but other settings should remain unchanged.
Need help?
Do you have a question about the A25 and is the answer not in the manual?
Questions and answers