Controls; Specifications; Attachments/Accessories - Toro HoverPro 450 Operator's Manual

Controls

Figure 19
1. Operator-presence bail
Operator-Presence Bail
The operator-presence bail
flywheel brake and ignition of the engine.
•
Squeeze the bail to the handlebar to run the
engine.
•
Release the bail to the handlebar to shut off the
engine.
Fuel-Shutoff Valve
Use the fuel-shutoff valve
flow of fuel to the engine.
•
Close the fuel-shutoff valve when you transport,
maintain, or store the machine.
•
Open the fuel-shutoff valve to run the engine.
2. Fuel-shutoff valve
(Figure 19) controls the
(Figure 19) to control the

Specifications

Model
02616

Attachments/Accessories

A selection of Toro approved attachments and
accessories is available for use with the machine
to enhance and expand its capabilities. Contact
your Authorized Service Dealer or authorized Toro
distributor or go to
for a list of all approved attachments and accessories.
g364793
To ensure optimum performance and continued safety
certification of the machine, use only genuine Toro
replacement parts and accessories. Replacement
parts and accessories made by other manufacturers
could be dangerous, and such use could void the
product warranty.
10
Cutting width Product width
457 mm (18 inches) 574 mm (22 5/8
inches)
www.https://www.toro.com/en-GB