Sealey SA44 Instructions

100mm EXTRA HEAVY DUTY ANGLE
ITEM PART NO. DESCRIPTION ITEM PART NO. DESCRIPTION
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component
parts without prior notice. IMPORTANT:
Sole UK Distributor, Sealey Group
01284 757500
PARTS LIST FOR:
GRINDER
SA44
Model:
ITEM PART NO. DESCRIPTION
WARRANTY:
INFORMATION:
E-mail: sales@sealey.co.uk
01284 703534
Web: www.sealey.co.uk
Thank you for purchasing a Sealey Product. Manufactured to a high standard this product will, if used according to these instructions
and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS,
WARNINGS AND CAUTIONS. USE THIS PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH
IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE
THE WARRANTY. PLEASE KEEP INSTRUCTIONS SAFE FOR FUTURE USE.
1. SAFETY INSTRUCTIONS
p WARNING! Ensure Health & Safety, local authority, and general workshop practice regulations are adhered to
when using this equipment.
p WARNING!
3
Use genuine parts only. Unauthorised parts may be dangerous and will
3
invalidate the warranty.
3
3
3
3
p WARNING!
3
3
3
3
3
3
3
3
3
3
p WARNING!
3
3
DO NOT
7
DO NOT
7
p WARNING! DO NOT
DO NOT
7
DO NOT
7
DO NOT
7
DO NOT
7
DO NOT
7
DO NOT
7
DO NOT
7
3
DANGER OF FIRE/EXPLOSION HAZARD
WARNING! The grinding process can produce streams of sparks which are a potential source of ignition especially when grinding metal.
o
o
DO NOT use the grinder where there are flammable liquids, solids or gases.
7 7
DO NOT allow grinder sparks to make contact with the operator’s clothing or any other fabric such as cleaning rags. Fabrics
7
7
contaminated with inflammable materials such as petrol, oil, grease, paint and solvents are a particular fire hazard.
To reduce the risk of clothing catching fire the operator should wear wool or cotton outer garments treated with a fire retardant in
3
3
preference to man-made fibres.
INSTRUCTIONS FOR:
100mm EXTRA HEAVY DUTY
ANGLE GRINDER
SA44
Model: