Chapter 2
Cabling the CSS
Connecting a CSS 11503 Power Cord
Connecting a CSS 11503 AC Power Cord
78-13884-03
Plug the power cord into a dedicated 3-wire grounding receptacle.
3.
4.
To power on and boot the CSS, refer to Chapter 3,
the
CSS.
The following sections provide information on:
•
Connecting a CSS 11503 AC Power Cord
Connecting a CSS 11503 DC Power Cord
•
To connect an AC power cord to a CSS 11503:
At the rear of the chassis, ensure that the CSS power switch is in the O (off)
1.
position.
Plug the AC power cord connector into the CSS power connector, as shown
2.
in
Figure
2-12.
Figure 2-12 Connecting a CSS 11503 AC Power Cord
1
2
1
Power switch
Cisco 11500 Series Content Services Switch Hardware Installation Guide
~
1 0 0 -2 4 0 V
5 0 -6 0 H z
5 A
4 3 0 W
2
AC power connector
Connecting the Power Cord
Booting and Configuring
2-27