Hitachi 55DMX01W Operating Manual
  1. Manuals
  2. Brands
  3. Hitachi Manuals
  4. Projection TV
  5. 55DMX01W
  6. Operating manual
Hitachi 55DMX01W Operating Manual

Hitachi 55DMX01W Operating Manual

Dlp technology rear projection television
Hide thumbs Also See for 55DMX01W:
Table of Contents

Advertisement

Quick Links

Download this manual
DLP
TM
TECHNOLOGY REAR PROJECTION TELEVISION
OPERATING GUIDE
SETUP
CUSTOMIZE
VIDEO
Digital Light Processing, DLP, Digital Micromirror Device and DMD are trademarks of Texas Instruments.
The DLP logo is a trademanrk of Texas Instruments.
55DMX01W
IMPORTANT SAFEGUARDS
FIRST TIME USE
THE REMOTE CONTROL
ULTRATEC BIT MAP
AUDIO
THEATER
ON SCREEN DISPLAY
USING THE DLP
REAR PROJECTION TV AS A PC
MONITOR
LAMP REPLACEMENT
PLUG AND PLAY
TRADEMARK ACKNOWLEDGMENT
AGENCY REGULATORY INFORMATION
USEFUL INFORMATION
SPECIFICATIONS
SERVICE HOTLINE
FEATURE INFORMATION
TM
TECHNOLOGY
2-4
5-24
25-37
38-68
69-79
80-91

Advertisement

Table of Contents
loading

Related Manuals for Hitachi 55DMX01W

Summary of Contents for Hitachi 55DMX01W

  • Page 1 VIDEO AUDIO THEATER Digital Light Processing, DLP, Digital Micromirror Device and DMD are trademarks of Texas Instruments. The DLP logo is a trademanrk of Texas Instruments. 55DMX01W IMPORTANT SAFEGUARDS FIRST TIME USE THE REMOTE CONTROL ULTRATEC BIT MAP ON SCREEN DISPLAY...

  • Page 2: Power Source

    HITACHI could void the user s warranty. MODIFICATIONS: The FCC requires the user to be notified that any changes or modifications made to this device that are not expressly approved by Hitachi America, Ltd. Home Electronics Division may void the user s warranty. POWER SOURCE This Rear Projection Television is designed to operate on 120 Volts 60Hz, AC current.

  • Page 3: Important Safeguards

    Please read it carefully and apply the knowledge you obtain from it to the proper operation of your HITACHI Rear Projection Television receiver. Please fill out your warranty card and mail it to HITACHI. This will enable HITACHI to notify you promptly in the improbable event that a safety problem should be discovered in your product model.

  • Page 4: Safety Tips

    Public Viewing of Copyrighted Material Public viewing of programs broadcast by TV stations and cable companies, as well as programs from other sources, may require prior authorization from the broadcaster or owner of the video program material. PLACEMENT LOCATION When placing your projection color television against a wall, make sure the back of your television is 5 inches away from the wall to ensure proper air ventilation.

  • Page 5: Remote Control Battery Installation And Replacement

    (Not included, order separately) OPTIONAL CAUTION: Television stand model SP-55D is designed for use with 55DMX01W only. Use of a smaller stand, a non Hitachi recommended stand or a generic stand may result in instability, causing possible injury. REMOTE CONTROL BATTERY INSTALLATION AND REPLACEMENT 1.
  • Page 6 VIEWING The major benefit of the HITACHI Rear Projection Television is its large viewing screen. To see this large screen at its best, test various locations in the room to find the optimum spot for viewing.

  • Page 7: Hook-Up Cables And Connectors

    When using a 75-Ohm coaxial cable system, connect the outdoor antenna or CATV coaxial cable to the ANT A (75-Ohm) terminal. If you have a second antenna or cable TV system, connect the coaxial cable to the ANT B terminal.

  • Page 8: Front View

    LAMP Indicator - NORMAL OPERATION INDICATOR IS OFF If light is lit, the lamp has failed. See page 80-83 for lamp replacement procedure. Consult your Hitachi dealer for proper part. If light is blinking, lamp cover is not assembled securely after replacement.
  • Page 9 Use this 15 pin D-Sub input for a quick hook up from your PC connection. TV/PC Button Press this button to switch from TV, PC INPUT 1 (PC1) and PC INPUT 2 (PC2). Your selection is shown in the top right corner of the screen.

  • Page 10: Front Panel Jacks And Connections

    If you have an S-VHS VCR, use the S-INPUT cable in place of the standard video cable. If you have a mono VCR, insert the audio cable into the left audio jack of your TV. INPUT 3 audio can be used for PC INPUT 2 audio when a PC INPUT 2 is connected.

  • Page 11: Rear Panel Jacks

    This jack provides high quality audio input from a Dolby Digital DVD player or HDTV Set Top Box. Use a digital optical cable to connect your TV to a compatible device. This input can be used for VIDEO: 1 or VIDEO: 2 audio, as selected in the THEATER- INPUT SOURCE menu.
  • Page 12 DO NOT connect standard VIDEO or S-VIDEO when using Y-P B P R input. Your component outputs may be labeled Y, B-Y, and R-Y. In this case, connect the components B-Y output to the TV s P B input and the components R-Y output to the TV s P R input.

  • Page 13: Tips On Rear Panel Connections

    When using the Y-P B P R input jacks, connect your components audio output to the TV s Left and Right audio input jacks. Your component outputs may be labeled Y, B-Y, and R-Y. In this case, connect the components B-Y output to the TV s P B input and the components R-Y output to the TV s P R input.

  • Page 14: Typical Full-Feature Setup

    Outside antenna or cable TV coaxial cable 2-Way signal splitter Surround Speakers connections on page 17 INPUT Sub Woofer WOOFER AUDIO TO HI-FI REAR SPEAKER INPUT Stereo System Amplifier Optional, see tips on page 13 S-VIDEO OUTPUT Laserdisc player, VCR, camcorder, etc.

  • Page 15: Rear Speaker Terminal Connections

    EXTERNAL SPEAKER CAUTION: Do not connect speakers simultaneously to the REAR SPEAKER terminal of the Rear Projection TV and an external amplifier. This could damage both the TV and the speakers. Your TV was designed to use 8-Ohm speakers only. Any other type may degrade the audio performance of your entertainment system.

  • Page 16: Connecting External Audio Sources

    Stereo System Amplifier NOTE: To prevent damage to the speaker and distorted sound, set the volume control of the audio amplifier lower and adjust the sound using the remote control of the TV set. CONNECTING EXTERNAL AUDIO SOURCES REAR PANEL OF TELEVISION...

  • Page 17: Audio System Setup

    ROCK ARENA, SURROUND-JAZZ CLUB, SURROUND-PRO LOGIC, or SURROUND-DOLBY DIGITAL mode. These speakers are connected to a separate audio amplifier. Use the AUDIO TO HI-FI output on the TV. These speakers are connected to a rear speaker 8-Ohm output on the TV.
  • Page 18 SURROUND REQUIRED FEATURE CONNECTION STADIUM ROCK ARENA JAZZ CLUB DOLBY PRO LOGIC DOLBY DIGITAL When left and right speakers are connected ( channels. The center channel audio will be heard from ( OPTIONAL CONNECTION Receive mono and stereo sound. Listener has feeling of being at a stadium. Listener has feeling of being at a rock concert.

  • Page 19: Connecting External Video Sources

    CONNECTING A MONAURAL AUDIO VCR OR LASERDISC PLAYER 1. Connect the cable from the VIDEO OUT of the VCR or the laserdisc player to the INPUT (VIDEO) jack on the TV set below. 2. Connect the cable from the AUDIO OUT of the VCR or the laserdisc player to the INPUT (MONO)/L(AUDIO) jack.

  • Page 20: Connecting A Stereo Vcr Or Stereo Laserdisc Player

    CONNECTING A STEREO VCR OR STEREO LASERDISC PLAYER Connect the cable from the VIDEO OUT of the VCR or the laserdisc player to the INPUT (VIDEO) jack, as shown on the TV set below. Connect the cable from the AUDIO OUT R of the VCR or the laserdisc player to the INPUT (AUDIO/R) jack.
  • Page 21 ANT A S-VIDEO PC AUDIO PC RGB INPUT 1 INPUT 1 CONVERTER VIDEO See tips on Page 13 ANT B (MONO) AUDIO MONITOR Back of VCR or Laserdisc Player S-VIDEO OUTPUT VCR or Laserdisc Player Hitachi Model or Similar Model...

  • Page 22: Connecting A Stereo Laserdisc/Dvd Player Or Hdtv Set Top Box To Input 1 Or 2 Component: Y-P B P R

    CONNECTING A STEREO LASERDISC/DVD PLAYER OR HDTV SET TOP BOX TO INPUT 1 OR 2 COMPONENT: Y-P B P R . Connect the cable from the Y OUT of the Laserdisc/DVD player or HDTV set top box to the INPUT (Y) jack, as shown on the TV set below.
  • Page 23 CONNECTING A DVD PLAYER OR HDTV SET TOP BOX WITH DOLBY DIGITAL OPTICAL OUTPUT TO INPUT 1 or 2 COMPONENT: Y-P Connect the cable from the Y OUT of the DVD player or HDTV Set Top Box to the INPUT (Y) jack, as shown on the TV set below.
  • Page 24 CONNECTING A DVD PLAYER OR HDTV SET TOP BOX WITH DOLBY DIGITAL COAXIAL OUTPUT TO INPUT COMPONENT: Y-P Connect the cable from the Y OUT of the DVD player or HDTV Set Top Box to the INPUT (Y) jack, as shown on the TV set below.

  • Page 25: The Genius Remote Control

    THE GENIUS REMOTE CONTROL In addition to controlling all the functions on your HITACHI Projection TV, the new remote control is designed to operate different types of VCRs, CATV (Cable TV) converters, satellite receivers, DVD players, and other audio/video equipment with one touch.

  • Page 26: How To Use The Genius Remote To Control Your Tv

    HOW TO USE THE GENIUS REMOTE TO CONTROL YOUR TV POWER button Press this button to turn the TV set on or off when the remote is in TV mode. TV button When the TV button is pressed, it will blink, to indicate the remote is in TV mode.
  • Page 27 Enter one, two, or three numbers to select channels. Enter 0 first for channels 1 to 9, or simply press the single digit channel you wish to tune then wait a few seconds for the TV to tune. For channels 100 and above, press the 1 button, wait until two dashes appear next to the channel display on your TV, then enter the remaining two numbers using the number buttons.
  • Page 28 COMMERCIAL SKIP (C.S.) button Press this button repeatedly to select channel skip time (30~180 seconds) when no menu is displayed and the TV will tune to the last channel viewed when the selected amount of time is up. The user can change stations SURF to any station they wish, and after the selected amount of time, the TV will tune back to the original channel.

  • Page 29: Picture In Picture (Pip)

    (ANT A and ANT B). The Picture-in-Picture feature is convenient when you want to watch more than one program at the same time. You can watch a TV program while viewing other programs from the ANT A source or any of the video inputs.
  • Page 30 If a channel is tuned during this SURF scanning, sub-pictures will be removed from the screen. SURF MODE PIP is allowed only when ANT A is selected as the main channel. If PARENTAL CONTROL MOVIE/TV RATINGS setting is ON, PIP SURF mode will be deactivated. SWAP button If you wish to switch what is being shown on the main picture to the sub-picture, press the SWAP button.

  • Page 31: Strobe Freeze

    PICTURE-IN-PICTURE (PIP) FREEZE button (With PIP ON) If you wish to freeze the sub-picture, press the FREEZE button. This is convenient when trying to write down the address for a mail order company, recording statistics for a sporting event, etc. To return the picture to motion, press the FREEZE button again.
  • Page 32 After replacing the batteries repeat the entire programming procedure as stated above. The MENU button will act as the VCR MENU button for HITACHI VCRs. The LAST CH button will act as your VCR ENTER button if required.

  • Page 33: Using The Remote To Control Cable Box Functions

    The SLEEP button will act as your cable box 100 button if required. The INPUT button will act as the TV/SAT button when in SAT mode. CABLE (CBL) button This button allows the remote to control your cable box by setting it to CABLE mode.

  • Page 34: Using The Remote To Control Satellite Receiver Functions

    After replacing the batteries repeat the entire programming procedure as stated above. The INPUT button will act as the TV/SAT button when in SAT mode. SATELLITE (SAT) button This button allows the remote to control your satellite receiver by setting it to SATELLITE mode.

  • Page 35: Using The Remote To Control Dvd Functions

    PRECODED DVD Buttons These buttons transmit the chosen precoded DVD codes. EXCLUSIVE TV Buttons These buttons are for operating the TV. NOTE: Refer to instruction manual of the DVD player for operation of the buttons exclusively for the DVD player.
  • Page 36 PRECODED AUDIO/VIDEO Buttons These buttons transmit the chosen precoded Audio/Video component codes. EXCLUSIVE TV Buttons These buttons are for operating the TV. NOTE: Refer to instruction manual of the Audio/Video equipment for operation of the buttons exclusively for the Audio/Video equipment.
  • Page 37 Magnavox ..15, 23, 29, 31, 35 Hitachi ..... 07 Magnin ....44 JVC .

  • Page 38: Ultratec Osd

    AUDIO THEATER 1. Press MENU on the remote control to display the different features on your HITACHI Projection TV. 2. Press the THUMB STICK to highlight a different feature. 3. Press EXIT on the remote control to quickly exit from a menu.
  • Page 39 Label channels PAY1, ABC, etc. Label video inputs VCR1, DVD1, etc. Allows you to set and view favorite channels. Turn TV on and off once, daily, or weekly. Automatically turn TV on with any VIDEO input. Feature to display dialogue/text.

  • Page 40: Menu Language

    SET UP Select SETUP when setting your TV up for the first time. Use the THUMB STICK the function desired. SET UP Use THUMB STICK to select the sub-menu of your choice. You can also use the number buttons to directly access the sub- menu of your choice.
  • Page 41 SET UP This graphic guide function will help you to properly set up your TV or Home Theater System. Simply answer PLUG & PLAY three questions and a graphic will be displayed, showing you the optimum setup for your personalized system.

  • Page 42: Signal Source

    SET UP Select ANTENNA if you are using an indoor or outdoor antenna. Select CATV if you have cable TV. SIGNAL SOURCE SETUP CUSTOMIZE VIDEO AUDIO THEATER 1. M EN U LAN GUAG E 2. P LU G & PL AY 3.

  • Page 43: Auto Channel Set

    SET UP This feature will automatically store active TV channels in CHANNEL MEMORY. This will allow you to skip AUTO CHANNEL SET unused channels when using CHANNEL UP ( ) or DOWN ( ). PRESS SELECT TO ACTIVATE/DEACTIVATE SETUP 1. MENU LANGUAGE 2.

  • Page 44: Channel Memory

    SET UP Use this function after AUTO CHANNEL SET to add or erase additional channels to the remote control CHANNEL MEMORY CHANNEL SETUP CUSTOMIZE VIDEO AUDIO THEATER 1. M E NU LAN GUAGE 2. P L UG & PLAY 3. S IGN A L SO U RC E CHA NNE L 3 4.

  • Page 45: Channel List

    SET UP This function allows you to review which channels are labeled in CHANNEL ID (ID.), which have been added CHANNEL LIST to CHANNEL MEMORY (SCAN), and which are protected by PARENTAL CONTROL (LOCK). SETUP CUSTOMIZE VIDEO AUDIO THEATER C H A NN EL LI ST ANT A SCAN L OCK...

  • Page 46: Clock Set

    SET UP The time must be set before you can use the 4 EVENT PROGRAM or TV TIME OUT. CLOCK SET TO S ET TIM E SETUP C L O C K S ET - - - - AM JAN 0 1 2 0 00...
  • Page 47 SET UP The PICTURE FORMATS function is very useful when setting up reception of High Definition, Standard PICTURE FORMATS Definition and NTSC signals. PRESS SELECT TO ACTIVATE/DEACTIVATE SETUP PIC T UR E F ORM AT S ANT A A SP ECT S TYL E NO RM A L FU LL FI LL...
  • Page 48 SET UP ASPECT STYLE Fill This function allows you to select when receiving either NTSC or SDTV. Full screen picture is available in this mode when receiving letterbox signal. Both vertical edges will be hidden if you select Fill for ordinary 4:3 picture. Smooth Wide This function allows you to select when receiving either NTSC or SDTV signal.
  • Page 49 SET UP The LAMP TIME counts the hours the lamp has operated. LAMP TIME SETUP CUSTOMIZE VIDEO AUDIO THEATER L A M P T I M E 15 H RE SE T M E N U TO M E N U B A R TO Q U I T Press SELECT to reset LAMP TIME (after lamp replacement).
  • Page 50 CUSTOMIZE This selection contains advanced features which will make TV viewing easier and more enjoyable. CUSTOMIZE Use this feature to give up to 20 channels a name when ANTENNA signal source is selected and up to 60 CHANNEL ID. channels a name when CATV signal source is selected.
  • Page 51 CUSTOMIZE VIDEO ID. Use this feature to give a name to any of the three video inputs. SETUP CUSTOMIZE VIDEO AUDIO 1 . C HA NN EL I D. 2 . VI D EO I D. 3 . F AM ILY FAV ORIT E S 4 .
  • Page 52 CUSTOMIZE This function allows you to group your favorite channels into six personalized categories that you can rename. FAMILY FAVORITES A total of 36 channels can be stored in the FAMILY FAVORITES function. (MENU) SETUP CUSTOMIZE VIDEO 1 . C HA NN EL ID. 2 .
  • Page 53 Press MENU and the category will be displayed as sub-pictures at the right edge of the screen. This is useful for previewing a category. Use THUMB STICK to highlight a favorite channel and the TV will automatically tune to that channel. Press EXIT to remove FAMILY FAVORITES OSD from the screen.

  • Page 54: Parental Control

    When FRONT PANEL LOCK is turned on, all buttons on the Front Panel will be deactivated, except the POWER button. When TV TIME OUT is turned on, you can set the BEGIN and END times and the TV cannot be viewed during that time period.

  • Page 55: Event Prog

    (SELECT) on the THUMB STICK to select mode ONCE (TV will turn on/off one time only), or mode DAILY (TV will turn on/off at the same time every day), WEEKLY (TV will turn on/off at same time every week) or OFF (to disable this function).
  • Page 56 , then press down (SELECT) on THUMB STICK to change AUTO LINK setting. When AUTO is selected, the TV will turn on and tune to VIDEO: 1, 2 or 3 automatically, when the VIDEO: 1, 2 or 3 input device is turned on.
  • Page 57 C.C. (Closed Caption) is for the program you are viewing. TEXT is for additional information such as news reports or a TV program guide. This information covers the entire screen and viewing the TV program is not possible. TEXT may not be available with every CHANNEL: 1 is used for the primary language (usually English).
  • Page 58 VIDEO Select VIDEO to adjust picture settings and improve picture quality. VIDEO THUMB STICK 1 . CO N TR A ST 2 . BR I G H TN E SS 3 . CO L O R 4 . TI N T 5 .
  • Page 59 VIDEO Your HITACHI Projection TV has a PERFECT PICTURE function which will automatically adjust picture ADVANCED settings to produce the highest quality picture possible. SETTINGS When PERFECT PICTURE is highlighted, press down on THUMB STICK to turn the PERFECT PICTURE on or off.
  • Page 60 AUDIO Select AUDIO to adjust the TV to your preference and to improve the sound quality. AUDIO SETUP THUMB STICK 1 . E QUAL IZ E R 2 . RE SE T 3 . ADVA NCED S E TT ING S...
  • Page 61 SAP (second audio program) which may be a secondary language, weather report, etc. The sources received will be displayed at the top center edge of the TV. The source you select will be displayed above the sources received.

  • Page 62: Theater Modes

    DYNAMIC BASS - ON, SURROUND - STADIUM, AUTO DYNAMIC CONTRAST - OFF. You can customize each of the above modes (TV, MOVIE, and SPORTS) to your preference to increase viewing performance and pleasure, depending upon the video program being viewed. However, if RESET is selected, all modes will reset to the initial conditions as explained above.
  • Page 63 65 and 66 for more information) NOTES: 1. This TV can not decode or process DTS (Digital Theater Surround). 2. If you can not adjust SR, SL, or SW, make sure they are turned on in the THEATER - SPEAKER SETUP menu.

  • Page 64: Dolby Pro Logic

    The left and right channels produce sound effects that will match the action on the TV screen. For example, Dolby Pro Logic will enhance the effect of a car viewed driving from the left side of the TV screen to the right side.

  • Page 65: Dolby Digital

    Center channel audio will always be heard from the TV s center speaker. If THEATER-SPEAKER SETUP-FRONT L/R is set to EXTERNAL W/AMP, center channel audio will still be heard from the TV s center speaker. Only the front Left and Right internal TV speakers can be turned off.

  • Page 66: Input Source

    THEATER Set audio input to Digital or Analog. This fueature is used only when viewing VIDEO:1 or VIDEO:2 inputs, INPUT SOURCE since only these inputs can accept DIGITAL audio input. SETUP VIDEO AUDIO CUSTOMIZE T he at e r M od es Su r r ou nd I n p u t Sou r ce Vi d 4...

  • Page 67: Listening Mode

    THEATER Choose between pre-set audio modes Standard, Night, or Maximum. Take advantage of these features to LISTENING MODE reduce or increase sound effects. SETUP CUSTOMIZE VIDEO AUDIO THEATER T hea te r M o des Sur ro un d Inpu t S our c e Li s te ni n g Po si t i on L is te n in g M od e...
  • Page 68 Select FRONT L/R - INTERNAL if you wish to use the TV internal Left and Right speakers. Select FRONT L/R- EXTERNAL W/AMP if you wish to turn off the TV internal Left and Right speakers and use speakers connected to an external amplifier.
  • Page 69 PC MODE CONNECTION AND OPERATION IMPORTANT: TURN OFF THE REAR PROJECTION TV/PC MONITOR AND THE PC BEFORE CONNECTING OR DISCONNECTING ANY CABLES. FRONT PANEL CONNECTION TO PC AUDIO IN VIDEO 3/PC2 S-VIDEO VIDEO L/(MONO) INPUT MENU TV/PC EXIT SELECT VIDEO 3...
  • Page 70 20 pre-set signal timing. Any additional new settings (more than 10) will over-write the first user s setting, second setting and so on. 3. Operation PC mode related to Tv functions are shown below. No. Item...
  • Page 71 PC ON SCREEN DISPLAY 4. Other signal formats may not be displayed correctly. Use AUTO ADJUST to automatically adjust the horizontal position, vertical position, clock, and phase. We recommend you use signal, which has more than 50% of amplitude of white area at each corner of the picture, execute Auto adjustment.
  • Page 72 2. Turn the DLP Rear Projection TV/PC monitor power on. 3. Press the TV/PC button on the front panel or on the remote control until you select PC mode. 4. Turn the PC power on. 5. Press the menu button on the DLP display.
  • Page 73 PC ON SCREEN DISPLAY 1. Press MENU on the remote control to display the different features in PC MODE. 2. Press the CURSOR buttons to highlight a different feature. 3. Press EXIT on the remote control to quickly exit from a menu. AUTO EXIT TO QUIT...
  • Page 74 AUTO AUTO ADJUST PHASE H POSITION V POSITION CLOCK DATA RECALL CONTRAST BRIGHTNESS COLOR BALANCE EXPANSION ENHANCE AUDIO EQUALIZER PC MODE ULTRATEC OSD Automatically adjust the geometry to fit the screen. Adjusts the phase to correct blurred or unstable images. Adjust horizontal position.
  • Page 75 PC ON SCREEN DISPLAY The following adjustments are independent of the TV mode: SET UP ADJUSTMENTS ¥Press MENU in PC mode for on screen display. ¥Press CURSORS to highlight the item to be adjusted. ¥Press SELECT to select the highlighted item.
  • Page 76 This feature allows you to adjust the horizontal position of the display. H POSITION H POSITION V POSITION V POSITION Adjusts the dot clock frequency to reduce the vertical stripe. Sampling clock of Mulit-Scan CLOCK Converter unit is changed when pressing CURSOR LEFT ( ) or CURSOR RIGHT ( ) buttons. CLOCK NOTE: 1.
  • Page 77 PC ON SCREEN DISPLAY DATA RECALL DATA RECALL ARE YOU SURE? CONTRAST CONTRAST NOTE: See TV contrast feature for additional information regarding contrast. BRIGHTNESS BRIGHTNESS Set HORIZONTAL POSITION, VERTICAL POSITION, CLOCK and PHASE to factory preset, for current PC format. Press THUMB STICK This feature allows you to adjust the contrast in PC mode.
  • Page 78 Use the CURSOR to change the COLOR BALANCE of red, green and blue. COLOR BALANCE COLOR BALANCE 100% GREEN 100% BLUE 100% The picture size is expanded when switching from REAL, NORMAL and FULL. REAL EXPANSION feature is not available on XGA or SXGA mode. EXPANSION REAL NORMAL...
  • Page 79 EQUALIZER RESET BALANCE LOUDNESS DYNAMIC BASS NOTE: TV mode and PC mode AUDIO have the same effect. BALANCE works if surround is set to OFF in TV/VCR mode. Use the CURSOR to highlight the function to be adjusted. Press CURSOR to adjust the function.

  • Page 80: Lamp Replacement

    30-45 minutes. If LAMP indicator is still lit, please contact your authorized service center. (see page 8) NOTES: ¥ Contact your Hitachi dealer for a new lamp unit. Using other lamps may cause damage to the TV Set. TYPE NAME: DLP...
  • Page 81 LAMP REPLACEMENT Turn off the main power switch on the front panel and unplug the power cord from the wall outlet. POWER LAMP TEMP POWER PUSH CAUTION: THE LAMP IS VERY HOT AND MAY CAUSE FIRE OR SEVERE BURNS. WAIT AT LEAST 30 MINUTES TO ALLOW THE LAMP TO COOL BEFORE PROCEEDING WITH LAMP REMOVAL.
  • Page 82 Loosen the two screws securing the latch cover with a Phillips Head Screw Driver as shown. If these screws are not loosened completely, the lamp unit cannot be removed. CAUTION: THE LAMP IS VERY HOT AND MAY CAUSE FIRE OR SEVERE BURNS. AFTER UNPLUGGING THE POWER CORD, WAIT AT LEAST 30 MINUTES UNTIL THE LAMP IS COOL BEFORE ATTEMPTING TO REMOVE.
  • Page 83 Plug power cord into AC outlet and turn on the main power switch. NOTES: 1. After installing the new lamp, don t forget to reset the LAMP TIME COUNTER. (see page 49) 2. The old lamp must be disposed of properly. For assistance, please call 1-800-HITACHI. ANT A S-VIDEO...

  • Page 84: Plug And Play

    This DLP Rear Projection TV complies with VESA DDC2B specifications, Plug & Play is a system with computer, peripherals (including monitors) and operating system. It works when the monitor is connected to a DDC ready computer that is running an operating system software that is capable for the plug &...

  • Page 85: Useful Info

    Modifications The FCC requires the user to be notified that any changes or modifications made to this device that are not expressly approved by Hitachi Home Electronics (America), Inc. may void the user s warranty. Cables Connections to this device must be made with shielded cables with metallic RFI/EMI connector hoods to maintain compliance with FCC Rules and Regulations.
  • Page 86 Dust the screen and cabinet with a soft cloth. Clean the screen with a soft cloth moistened in warm water and dry with a soft cloth. A mild soap may be used if the screen is extremely dirty. Place your television away from extreme heat, humidity and extremely dusty places. Remove the plug from the wall outlet if your television will not be used for a long period of time, for instances, when you go on vacation.
  • Page 87 3) If there is still no power, unplug the power cord from the wall. Wait thirty seconds and plug the power cord back in. Press the power switch again. This protective technology should provide for years of lasting entertainment from your HITACHI Rear Projection Television. ©...

  • Page 88: Care Of Your Hitachi Projection Tv

    This is not a malfunction. The image will become normal after a certain period of time. CARE OF YOUR HITACHI PROJECTION TV ¥ IGNITION NOISE: Black spots or horizontal streaks may appear, picture may flutter or drift. Usually caused by interference from automobile ignition systems, neon lamps, electrical drills and other electrical appliances.

  • Page 89: Specification

    ¥ Power Input ... . .AC 120V, 60Hz ¥ Power Consumption (operating) 55DMX01W ....360W ¥ Power Consumption (maximum) 55DMX01W .
  • Page 90 Home Electronics Division Hitachi has made every effort to assure you hours of trouble free operation from your unit. However, should you require service, a network of Hitachi Authorized Service Facilities has been established in all 50 states and Puerto Rico. Each facility will provide you with convenient and expedient assistance.

  • Page 91: Feature Information

    FEATURE INFORMATION As the digital era dawns, Hitachi has models that provide the best possible images today...and tomorrow. Our HDTV- Ready DMX model incorporates Digital Light Processing signals (1080i, 720P, 480P, 480i). DIGITAL MICROMIRROR DEVICE At the heart of the Ultra Vision Digital DMX model is the Digital Micromirror Device chip that has an array of microscopic mirrors mounted on a standard logic device.
  • Page 92 QR46312...

This manual is also suitable for:

55dmx01wom

Table of Contents