Hitachi 43F300 Operating Manual page 33

VIDEO
Use the CURSOR or to highlight the function to be adjusted.
Press the CURSOR or to adjust the function.
Press MENU to return to main menu or select PICTURE MODE to return to previous menu.
Press EXIT to quit menu.
Contrast
Brightness
Color
Tint
Sharpness
Vertical Position
NOTES: 1. If CONTRAST is selected, you are adjusting CONTRAST. The additional menu items BRIGHTNESS, COLOR, TINT,
and SHARPNESS can be selected and adjusted in the same manner.
2. It may be necessary to adjust TINT to obtain optimum picture quality when using the COMPONENT VIDEO Y-P B P R
input jacks.
3. If you are using the COMPONENT VIDEO input jacks (Y-P B P R ) and notice that the TINT and COLOR are abnormal,
check to make sure that VIDEO-Color System is set properly.
Use this function to change the contrast between black and white levels in the picture. This adjustment
will only affect the picture when ADVANCED SETTINGS DIMMER is OFF.
Use this function to adjust overall picture brightness.
Use this function to adjust the level of color in the picture.
Use this function to adjust flesh tones so they appear natural.
Use this function to adjust the amount of fine detail in the picture.
This function allows you to select when aspect style is 4:3 ZOOM. Vertical position can be changed with
this mode. Adjustable range is -10 (video center is toward bottom of screen) to +10 (video center is
toward top of screen).
33