ABB HT564492 Operation Manual page 41

Operation Manual / 4 Product description / A100-M axial
2 Removal and installation
Turbocharger with clamping nuts
Figure 7: Removing the foot mounting
1. Loosen clamping nuts on compressor-end and turbine-end foot (see Loosening the clamp-
ing nut [➙ 12]).
2. Fit transport screws (90334 / 90335) to secure the sliding block (68003) on the left and
right on the turbine-end foot.
Lift the turbocharger from the engine and put it down.

Cover all oil connections.

© Copyright 2016 ABB. All rights reserved. HZTL4033_EN
Page 11 / 113
Revision A July 2016