1. Manuals
  2. Brands
  3. Hitachi Manuals
  4. Projector
  5. CP-X443 series
  6. User manual – operating manual

Hitachi CP-X443 User Manual – Operating Manual

Hitachi cp-x443: user guide
Hide thumbs Also See for CP-X443:
Table of Contents

Advertisement

Quick Links

Download this manual
Projector
CP-X443
User Manual – Operating Guide
Thank you for purchasing this projector.
WARNING ►Before using, read the "User's Manual - Safety Guide" and
these manuals to ensure correct usage through understanding. After reading,
store them in a safe place for future reference.
About this manual
Various symbols are used in this manual. The meanings of these symbols are
described below.
WARNING This symbol indicates information that , if ignored, could possibly
result in personal injury or even death due to incorrect handling.
CAUTION
This symbol indicates information that , if ignored, could result
possibly in personal injury or physical damage due to incorrect
handling.
Please refer to the pages written following this symbol.
NOTE • The information in this manual is subject to change without notice.
• The manufacturer assumes no responsibility for any errors that may appear in this manual.
• The reproduction, transmission or use of this document or contents is not permitted without
express written authority.
Trademark acknowledgment
• VGA and XGA are registered trademarks of the International Business Machines
Corporation.
• Apple and Mac are registered trademarks of the Apple Computer, Inc.
• VESA and SVGA are trademarks of the Video Electronics Standard Association.
• Windows is a registered trademark of the Microsoft Corporation.
• Internet Explorer is a trademark of the Microsoft Corporation.
• Netscape is a registered trademark of the Netscape Communications Corporation.
All other trademarks are the property of their respective owners.
1

Advertisement

Table of Contents
loading

Related Manuals for Hitachi CP-X443

Summary of Contents for Hitachi CP-X443

  • Page 1 Projector CP-X443 User Manual – Operating Guide Thank you for purchasing this projector. WARNING ►Before using, read the "User's Manual - Safety Guide" and these manuals to ensure correct usage through understanding. After reading, store them in a safe place for future reference.

  • Page 2: Table Of Contents

    Part names ....4 Projector ..... 4 Control buttons .

  • Page 3: Projector Features

     Rich Connectivity This projector has a variety of I/O ports. It can be easily connected to many signal sources like PC, DVD and so on. The rich connectivity provides you more options to make your presentation impressive.

  • Page 4: Part Names

    In such a case, please push the Restart switch by using a cocktail stick or similar, and before turning on again, make the projector cool down at least 10 minutes without operating. Only push the Restart switch in these exceptional instances.

  • Page 5: Control Buttons

    Control buttons STANDBY/ON button (  STANDBY/ON INPUT button (  KEYSTONE button (  RESET button (  Remote control STANDBY/ON button (  VIDEO button (  BLANK button (  ASPECT button (  Lever switch ( ...

  • Page 6: Setting Up

    • Don’t place the projector on a carpet, cushion or bedding. • Don’t place the projector in direct sunlight or near a hot object such as heater. • Put nothing about lens and vents of the projector. Put nothing on the projector.

  • Page 7: Arrangement

    The values shown in the table are calculated for a full size screen: 1024 x 768 (a) The screen size (diagonal) (b) Distance from the projector to the screen (±10%) (c) The height of the screen (±10%) At 4:3 screen...

  • Page 8: Adjusting The Projector's Elevator

    You can use the elevator feet to make adjustments if the surface on which you need to set the projector is uneven or if you otherwise need to adjust the angle of projection. The adjustment range of the elevator feet is 0 to 9 degrees.

  • Page 9: About The Fi Lter Cover For Bottom-Up Use

    WARNING ►Do not replace the fi lter cover during use or immediately after use. While the projector connects with a power supply, or the projector is in a high temperature state, handling could cause an electric shock, a fi re, a burn and/or malfunction to the projector.Before handling, make sure the power...

  • Page 10: Connecting Your Devices

    Protection) and therefore capable of displaying video from HDCP compatible DVD players, et al. However, if the HDCP standards are modifi ed, the CP-X443's DVI might not be able to display video from HDCP compatible device developed in conformance to...
  • Page 11 Examples of connection with a computer Audio out DVI out RGB out Connecting to a monitor (output) RGB in Connecting to a speaker with amplifi er (output) * AUDIO IN is linked to RGB IN1/2 USB cable DC OUT USB(A) RS-232C COMPONENT VIDEO R-AUDIO IN-L...
  • Page 12 Setting up Examples of connection with a VCR/DVD player Video out Audio (L) out Audio (R) out S-Video out Audio (L) out Audio (L) out Audio (R) out Component video out Audio (L) out Audio (R) out RGB out Component video out Audio/Video cable Audio/Video cable S-Video cable...

  • Page 13: Connecting Power Supply

    WARNING ►Please use extra caution when connecting the power cord as incorrect or faulty connections may result in fi re and/or electrical shock. • Only use the power cord that came with the projector. If it is damaged, contact your dealer to newly get correct one.

  • Page 14: Remote Control

    Remote control Remote control Laser pointer WARNING ►The laser pointer of the remote control is used in place of a fi nger or rod. Never look directly into the laser beam outlet or point the laser beam at other people. The laser beam can cause vision problems. CAUTION ►Use of controls or adjustments or performance of procedures other than those specifi...

  • Page 15: Using The Remote Control

    • Since the remote control uses infrared light to send signals to the projector (Class1 LED), be sure to use the remote control in an area free from obstacles that could block the remote control’s output signal to the projector.

  • Page 16: Power On/Off

    WARNING ►When the power is on, a strong light is emitted. Do not look into the lens or vents of the projector. NOTE • Turn the power on/off in right order. Please power on the projector before the connected devices. Power off the projector after the connected devices.

  • Page 17: Operating

    COMPONENT VIDEO  S-VIDEO  VIDEO ● When the TURN ON is selected to the item AUTO SEARCH of OPTION menu , the projector checks the current selected video port at fi rst. If no input is ( ...

  • Page 18: Adjusting Screen With One-Touch

    fi nd any input signal. The search is started from the current port. Then when an input is found, the projector will stop searching and display the image. If no signal is found, the projector will return to the state selected before the operation.

  • Page 19: Using The Automatic Adjustment Feature

    Using the automatic adjustment feature Press the AUTO button on the remote control.  At a RGB signal The vertical position, the horizontal position, the clock phase and horizontal size will be automatically adjusted. Make sure that the application window is set to its maximum size prior to attempting to use this feature.

  • Page 20: Correcting The Keystone Distortions

    To exit the MAGNIFY mode and restore the screen to normal, press the OFF button of MAGNIFY on the remote control. ● The projector automatically exits the MAGNIFY mode when the input signal changes, or when an operation of changing the display condition (automatic adjustment, etc.) is executed.

  • Page 21: Freezing The Screen

    STANDBY/ON, ONE TOUCH, RGB, VIDEO, BLANK, AUTO,ASPECT, VOLUME, MUTE, KEYSTONE, POSITION and MENU is pressed. ● If the projector continues projecting a still image for long time, the LCD panel might possibly be printed. Do not leave the projector in FREEZE mode for too long.

  • Page 22: Operating The Computer Screen

    BLANK function, or displaying the menu screen. USB mouse and keyboard control Connect the projector’s USB port to the computer via the mouse cable. Available function Move pointer Left click with mouse Right click with mouse Press keyboard’s...

  • Page 23: Multifunctional Settings

    Use the cursor buttons ▲/▼ to select an item to operate. Then press the cursor button ► on the projector or remote control, or the ENTER button on the remote control to progress. The operation menu of the selected item will appear.

  • Page 24: Easy Menu

    With the EASY MENU, items shown in the table below can be performed. Select an item using the cursor buttons ▲/▼ on the projector or remote control. Then perform it referring to the following table. Item Using the buttons ◄/► switches the mode for aspect ratio.
  • Page 25 Multifunctional settings EASY Menu (continued) Item Description Using the buttons ◄/► switches the mode for mirror status. MIRROR 34). See the item MIRROR of section SETUP menu (  Performing this item resets all of the items of EASY MENU except FILTER TIME and LANGUAGE.

  • Page 26: Picture Menu

    Select an item using the cursor buttons ▲/▼ on the projector or remote control, and press the cursor button ► on the projector or remote control, or the ENTER button on the remote control to progress. Then perform it referring to the following table.
  • Page 27 PICTURE Menu (continued) Item Using the buttons ▲/▼ switches the mode of color temperature. HIGH  MIDDLE  LOW  CUSTOM To adjust CUSTOM Selecting the CUSTOM and then pressing the button ► or the ENTER button displays a dialog to aid you in adjusting the OFFSET and/or GAIN of CUSTOM mode.
  • Page 28 Selecting a mode of MY MEMORY using the buttons ▲/▼ and then pressing the button ► or the ENTER button performs each function. This projector has 4 numbered memories for adjustment data. Performing the LOAD1, LOAD2, LOAD3 or LOAD4 loads the data on the memory whose number corresponds with the command’s...

  • Page 29: Image Menu

    Select an item using the cursor buttons ▲/▼ on the projector or remote control, and press the cursor button ► on the projector or remote control, or the ENTER button on the remote control to progress. Then perform it referring to the following table.
  • Page 30 Multifunctional settings IMAGE Menu (continued) Item Description Using the buttons ▲/▼ adjusts the horizontal size. Large  Small • This item can be selected only at a RGB signal (except DVI-D). H SIZE • When this adjustment is excessive, the picture may not be displayed correctly.

  • Page 31: Video Qlty. Menu

    Select an item using the cursor buttons ▲/▼ on the projector or remote control, and press the cursor button ► on the projector or remote control, or the ENTER button on the remote control to progress. Then perform it referring to the following table.

  • Page 32: Input Menu

    When the SCART RGB is selected, the COMPONENT VIDEO port function as a port for a SCART RGB signal input. A SCART adapter and SCART cable realize a SCART RGB input to the projector. For details, ask your dealer. Using the buttons ▲/▼ switches the mode for video format.
  • Page 33 INPUT Menu (continued) Item Selecting this item displays a dialog titled “INPUT INFORMATION”. It shows the information about the current input. • The “FRAME LOCK” message on the dialog means the frame lock function is working. This function automatically works when a RGB INFORMATION signal with vertical frequency of 50 to 60 Hz is input, and it displays a moving picture more smoothly.

  • Page 34: Setup Menu

    Select an item using the cursor buttons ▲/▼ on the projector or remote control, and press the cursor button ► on the projector or remote control, or the ENTER button on the remote control to progress. Then perform it referring to the following table.

  • Page 35: Screen Menu

    Select an item using the cursor buttons ▲/▼ on the projector or remote control, and press the cursor button ► on the projector or remote control, or the ENTER button on the remote control to progress. Then perform it referring to the following table.
  • Page 36 Multifunctional settings SCREEN Menu (continued) Item Using the buttons ▲/▼ switches the mode for the start up screen. The start up screen is the screen displayed when no signal or an unsuitable signal is detected. MyScreen  ORIGINAL  TURN OFF MyScreen is the screen you can register a desired screen.
  • Page 37 SCREEN Menu (continued) Item Using the buttons ▲/▼ turns on/off the message function. TURN ON  TURN OFF When the TURN ON is selected, the following message function works. “AUTO IN PROGRESS” while automatically adjusting MESSAGE ”NO INPUT IS DETECTED” ”SYNC IS OUT OF RANGE”...

  • Page 38: Option Menu

    Long (max. 99 minutes)  Short (min. 0 minute = DISABLE) AUTO OFF When the time is set to 0, the projector is not turned off automatically. When the time is set to 1 to 99, and when the passed time with a no-signal or an unsuitable signal reaches at the set time, the projector lamp will go off and the power indicator begins blinking.
  • Page 39 OPTION menu as the use time of the air fi lter. Pressing the RESET button on the remote control or the button ► of the projector for about 3 seconds displays a dialog. To reset the fi lter time, select the RESET using the button ▲.

  • Page 40: Network Menu

    Select an item using the cursor buttons ▲/▼ on the projector or remote control, and press the cursor button ► on the projector or remote control, or the ENTER button on the remote control to progress. Then perform it referring to the following table.
  • Page 41 NETWORK menu. At fi rst, set the DHCP function to TURN OFF. It is also possible to confi gure the projector's network settings using a Web browser (Internet Explorer 5.0 or higher; Netscape 6.2 or higher) on a computer connected to the network.
  • Page 42 NETWORK Menu (continued) Information 1) Allows you to confi rm the current network settings of the projector. 2) Click on "return to top page" to return to Screen 2. IP Confi guration Allows you to configure the IP address, subnet mask and default gateway if DHCP is disable.
  • Page 43 Close the Web browser to end the confi guration session. NOTE • If the Projector Network Confi guration dialog is accessed by more than one computer at the same time, the last computer to login retains the authority to modify the settings.

  • Page 44: Maintenance

    Note that shards of glass could damage the projector’s internals, or cause injury during handling, so please do not try to clean the projector or replace the lamp yourself. • If the lamp should break (it will make a loud bang when it does),...
  • Page 45 When the indicators or a message prompts you to replace the lamp, replace the lamp as soon as possible. Turn the projector off, and unplug the power cord. Allow the lamp to cool for at least 45 minutes. To prepare a new lamp, contact your dealer and tell the lamp type number = DT00691.

  • Page 46: Air Fi Lter

    ►Use only the air fi lter of the specifi ed type. Do not use the projector with the air fi lter and fi lter cover removed.

  • Page 47: Other Care

    ►Before caring, make sure the power switch is off and the power cable is not plugged in, and then allow the projector to cool suffi ciently. The care in a high temperature state of the projector could cause a burn and/or malfunction to the projector.

  • Page 48: Troubleshooting

    Troubleshooting Troubleshooting Related messages When the unit's power is on, messages such as those shown below may be displayed. When any such message is displayed on the screen, please respond as described below. If the same message is displayed after the treatment, or if a message other than the following appears, please contact your dealer or service company.
  • Page 49 This projector is equipped with an automatic shut-down function, such that the power will automatically be turned off when lamp usage time has reached 2000 hours.

  • Page 50: Regarding The Indicator Lamps

    Please turn the power off, and allow the unit to cool down at least 20 minutes. After the projector has suffi ciently cooled down, please make confi rmation of the following items, and then turn the power on again.
  • Page 51 In such a case, press the “” (OFF) side of the power switch, and wait at least 45 minutes. After the projector has suffi ciently cooled down, please make confi rmation of the attachment state of the lamp and lamp cover, and then turn the power on again.

  • Page 52: Phenomena That May Easily Be Mistaken For Machine Defects

    If the situation cannot be corrected, The projector’s microprocessor may need to be reset. Please push the Restart switch by using a cocktail stick or similar and the projector will restart. Some setting may be wrong. Please use the FACTORY RESET function of SERVICE menu in the OPTION menu default.
  • Page 53 Adjust the BRIGHT to a higher level using the menu function displayed. or the remote control. The computer cannot detect the projector as a plug and play monitor. Make sure that the computer’s can detect a plug and play monitor using other plug and play monitor.

  • Page 54: Warranty And After-Service

    AUDIO OUT ... Stereo mini x1 Lamp Optional Air filter parts Others Specification Liquid crystal projector 2.0 cm (0.79 type) TFT active matrix 786,432 pixels (1024 horizontal x 768 vertical) Zoom lens F=1.7 ~ 2.1 f=24.4 ~ 29.3 mm 230W UHB 3W x 4 AC100-120V/4.0A, AC220-240V/2.0A...
  • Page 55 Specifi cations Specifi cations (continued) 336mm...

Table of Contents