Advertisement
Figure 2
Step 3: disassemble / assemble the battery
See Figure 4 for steps 1 to 4.
1. Carefully disconnect the battery plug from the main print; Arrow 1.
2. Disconnect the four cable clamps with cable harness from the battery mount. The cable
clamps are omitted; Arrows 2 to 5.
3. Loosen the five screws (torx 20) that hold the battery cover in place; Arrows 6 to 10.
4. Now remove the battery together with the battery holder.
See Figure 5 for steps 5 through 9.
5. Place the new bottom half of the battery holder with the arrows pointing forward; Arrow 1.
Make sure that no cables are trapped underneath.
6. Place the new battery in the battery holder.
7. Fit the top half of the new battery holder and screw it tight with four screws (torx 20);
Arrows 2 to 5.
Spare parts for robot mowers, vacuum cleaners, power tools, air purifiers;
Order this Husqvarna battery upgrade pack;
Figure 4
https://plus.parts
https://plus.parts/en/catalogsearch/result/?q=7391736288408
Figure 3
Advertisement
