Dispenser Calibration - Miele PW 6241 Operating And Installation Instructions

Optional modules (depending on country)
To go directly to
Dispenser
calibration when
the machine is
switched off:
40

Dispenser calibration

Dispenser calibration is used to measure the throughput of the
individual dispenser pumps.
Press and hold multifunction button 2 and switch the machine on

with  "Mains on".
Dispenser calibration
Dispenser pump 1
Dispenser pump 2
Options:
Dispenser pump 1
- to
Select a dispenser pump.

When a dispenser pump is selected, the following will appear in the
display:
Dispenser calibration
V:
100 ml
Useful tip: The dispensing amount can be set from 0 to 9999 ml in
1 ml increments.
0/1
Press the multifunction button.

The dispensing hose will fill up.
Stop the process by pressing the

Run the hose of the dispenser pump upwards into a measuring

vessel.
Hold the entire measuring vessel above the dispenser pump while

doing this.
 Irritant detergents!
Skin and eye irritation.
Avoid contact with skin and eyes, wear protective clothing.
Return to the main menu by pressing  "Back".

Dispenser calibration
Dispenser pump 1
Dispenser pump 2
Select a dispenser pump.

Main menu

13
Dispenser pump 1

t: 0 s P: No

0/1
0/1
button.
Main menu





