Operation - Husqvarna A 1000 Operator's Manual

CAUTION:
damage to the product, other materials or
the adjacent area if the instructions in the
manual are not obeyed.
Note:
Used to give more information that is necessary
in a given situation.
Safety instructions for operation
WARNING:
instructions that follow before you use the
product.
• Always stop the product before you disconnect the
power cord from the wall outlet.
• Before you use this product, you must read and
understand the contents of this operator's manual.
• Save all warnings and instructions.
• The operator is responsible for accidents that occur
to other persons or their property.
• Keep the product clean. Make sure that you can
clearly read signs and decals.
• Be careful when you close the filter frame with the
Toggle fasteners. Risk of pinching.
• Do not use a damaged product or a product with
damaged power cord or power plug.
• Put the product on a level ground before you
assemble the product.
• Only connect the product to a correctly grounded
wall outlet.
• Do not use the product if the HEPA is damaged.
Risk of dust dispersion.
• Make sure that the primary voltage agree with the
primary voltage that shows on the rating plate of the
product.
• Only use the product in environments where there
are no explosive gases.
• Only use the product with dry materials that are not
explosive.
To start the product
1. Connect the power cord to the wall outlet.
2. If the outlet hose is available, attach it to the product.
3. Push the On/Off button to start the product.
12
Used if there is a risk of
Read the warning

Operation

Personal protective equipment
WARNING:
instructions that follow before you use the
product.
• Health impairing dust can be spread during filter
and bags replacement. Accordingly, the user should
wear protective glasses, protective gloves, and a
breathing mask conforming to FFP2.
Safety instructions for maintenance
WARNING:
instructions that follow before you use the
product.
• If the maintenance is not done correctly and
regularly, the risk of injury and damage to the
product increases.
• Use personal protective equipment. Refer to
Personal protective equipment on page 12 .
• Disconnect the product from the power source
before you do the maintenance.
• Do not change the product. Modifications that are
not approved by the manufacturer can cause serious
injury or death.
• Always use original accessories and spare parts.
Accessories and spare parts that are not approved
by the manufacturer, can cause serious injury or
death.
• Replace damaged, worn or broken parts.
• Only do the maintenance as given in this operator's
manual. Let an approved service agent do all other
servicing.
• If the replacement of the supply cord is necessary,
this has to be done by the manufacturer or his agent
in order to avoid a safety hazard.
• Let an approved service agent do servicing on the
product regularly.
To stop the product
1. Press the On/Off button to stop the product.
2. Disconnect the power cord from the wall outlet.
3. Remove the outlet hose if attached.
Read the warning
Read the warning
923 - 001 - 27.04.2022