Pro-Ject Audio Systems 1.2 Installation Manual
  1. Manuals
  2. Brands
  3. Pro-Ject Audio Systems Manuals
  4. Turntable
  5. 12
  6. Installation manual

Pro-Ject Audio Systems 1.2 Installation Manual

Hide thumbs Also See for 1.2:

Advertisement

Table of Contents

INSTRUCTIONS FOR USE
PRO-JECT 1.2

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 1.2 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Pro-Ject Audio Systems 1.2

Summary of Contents for Pro-Ject Audio Systems 1.2

  • Page 1 INSTRUCTIONS FOR USE PRO-JECT 1.2...

  • Page 3: Controls, Features And Connections

    The success of PRO-JECT record players and many customer's comments have lead us to develop a better model based on the PRO-JECT 1. The PRO-JECT 1.2 is characterized by the use of a higher quality tonearm.

  • Page 4: Fitting And Connecting The Cartridge

    (L -) The full sound quality of the PRO-JECT 1.2 can only be achieved if the cartridge is correctly adjusted. Particular tools are required to accomplish this job properly. If you are not well acquainted with the adjustment of cartridges you are advised to call upon the willing help of your PRO-JECT dealer to accomplish this task for you.

  • Page 5: Anti-Skating Force Adjustment

    Connection to the amplifier The PRO-JECT 1.2 has a captive tonearm signal lead (14) for connection to the amplifier. Use the Phono input (sometimes labeled gram, disc or RIAA) on your amplifier. Make sure that the phono input offers correct matching and amplification for the type of cartridge used.

  • Page 6: Maintenance And Cleaning

    The record player should be positioned on a low-resonance surface such as wood or multiple layer ply board to avoid structural vibrations disturbing replay. Technical data PRO-JECT 1.2 Mains power supply 220-240V, 50 cycles Power consumption Nominal speeds * 33,33/45,11 r.p.m.

  • Page 7: Warranty

    Potential incorrect use and fault conditions PRO-JECT turntables are manufactured to the highest standards and undergo strict quality controls before leaving the factory. Faults that may possibly occur are not necessarily due to material or production faults but can sometimes be caused by incorrect use or unfortunate circumstances. Therefore the following list of common fault symptoms is included.

  • Page 9: Technical Specifications

    Pro-Ject Phono Box MM/MC Phono Pre-amplifier Good sound from sound technology Good sound from sound technology Good sound from sound technology Good sound from sound technology !" Metal case shields the electronics from vibrational and electromagnetic interference !" Small size allows installation close to record player !"...

Table of Contents

Save PDF