Subscribe to Our Youtube Channel
Related Manuals for Tarana GIGABIT 1
Summary of Contents for Tarana GIGABIT 1
- Page 1 Remote Node Installation Guide (CBRS) vIG_RN_CBRS_2021-08 PN: 18-0010-001 Rev. 1.0 RN Installation Guide vIG_RN_CBRS_2021-08 — 0 Tarana Wireless, Inc. ©2021. All rights reserved.
-
Page 2: Table Of Contents
PHYSICAL INSTALLATION ................10 ......................10 OUNTING RN C ................10 HASSIS RACKET SSEMBLY ..............11 LEVATION RACKET NSTALLATION ....................13 NTENNA IMING RN ..............14 ROUNDING AND OWERING THE RN Installation Guide vIG_RN_CBRS_2021-08 — 1 Tarana Wireless, Inc. ©2021. All rights reserved. -
Page 3: Safety And Warnings
Safety and Warnings Tarana G1 equipment is designed for installation and use by trained General Health and Safety Information professionals and requires adherence to all relevant regulatory, safety, and telecom industry best practice guidelines for outdoor radios. Topic Explanation General Warnings... -
Page 4: Health And Safety Warning
Tout réglage ou modification faits à cet équipement hors du cadre édicté par ce guide d’utilisation ou par toute autre documentation supplémentaire pourraient causer des blessures ou endommager l’équipement et peut entraîner l’annulation de sa garantie. RN Installation Guide vIG_RN_CBRS_2021-08 — 3 Tarana Wireless, Inc. ©2021. All rights reserved. -
Page 5: General Hazards
Connections Power Supply The RN must be powered by a Tarana provided Power over Ethernet (PoE) injector. Maximum Ambient The maximum ambient temperature for the RN product is 55 degrees C. To ensure correct operation and to maximize long term Temperature component reliability, ambient temperatures must not be exceeded. -
Page 6: Supplier's Declaration Of Conformity
Supplier’s Declaration of Conformity RN Installation Guide vIG_RN_CBRS_2021-08 — 5 Tarana Wireless, Inc. ©2021. All rights reserved. -
Page 7: Regulatory Information
Safety interference that may cause undesired operation. 26, 2014 and EN 62368-1: 2014, Second Edition, + A11:2017, Audio/Video, Modifications not expressly approved by Tarana Wireless Inc. could void the Information and Communication user's authority to operate the equipment. Technology Equipment NOTE: This equipment has been tested and found to comply with the FCC limits •... -
Page 8: Usa Cbrs Band Categoryb Device
USA CBRS Band Category B Device The Tarana RN requires installation by a CPI (Certified Professional Installer) as defined in Section 96.39 and 96.45 of FCC part 96 requirements. The RN is Classified as a Category B CBSD (Citizen Broadband Radio Device), which requires the following information be recorded and uploaded as part of the CPI process per section 96.45. -
Page 9: Preparation
Grounding wire per local electrical code with attachment tapped for an Use the following checklists to ensure you have all the required items before M5 screw beginning a Tarana RN installation. Verify the contents of the Tarana supplied hardware. Ethernet cable - shielded CAT5e/CAT6, outdoor-rated... -
Page 10: Tarana Hardware And Peripherals
Ethernet cable cord grip (8) M5 flanged-head screw with thread lock RN chassis bracket RN elevation bracket Tarana G1 Remote Node (RN) radio unit Figure 3: Tarana Hardware RN Installation Guide vIG_RN_CBRS_2021-08 — 9 Tarana Wireless, Inc. ©2021. All rights reserved. -
Page 11: Physical Installation
2 threads are exposed coming out of the backside of each tab. Figure 4: Attaching the Chassis Bracket RN Installation Guide vIG_RN_CBRS_2021-08 — 10 Tarana Wireless, Inc. ©2021. All rights reserved. -
Page 12: Elevation Bracket Installation
Tilt adjustment may be made from 20 degrees up to 5 degrees down. Figure 5: Elevation Bracket Installation (Pole Mount) RN Installation Guide vIG_RN_CBRS_2021-08 — 11 Tarana Wireless, Inc. ©2021. All rights reserved. - Page 13 Do not modify or enlarge the screw holes as this will compromise the corrosion protection of the finish. Step 4. Step 5. Figure 6: Elevation Bracket Installation (Wall Mount) RN Installation Guide vIG_RN_CBRS_2021-08 — 12 Tarana Wireless, Inc. ©2021. All rights reserved.
-
Page 14: Antenna Aiming
RN. Antenna alignment will be verified in the final step via the web UI. Figure 7: Aiming the RN RN Installation Guide vIG_RN_CBRS_2021-08 — 13 Tarana Wireless, Inc. ©2021. All rights reserved. -
Page 15: Grounding And Powering The Rn
RN enclosure. limit the adjustment of the antenna. Remove the nut from the cord grip body and then push out the Step 3. grommet. RN Installation Guide vIG_RN_CBRS_2021-08 — 14 Tarana Wireless, Inc. ©2021. All rights reserved. - Page 16 Insert the grommet into the cord grip body chamfered end first. Then Step 7. screw the sealing nut onto the body and torque the sealing nut to 5.6— 6.2 N-m (4.1- 4.6 lb-ft). RN Installation Guide vIG_RN_CBRS_2021-08 — 15 Tarana Wireless, Inc. ©2021. All rights reserved.
- Page 17 There are 3 LEDs on the bottom edge of the RN that will cycle through patterns and colors during this time. At the end of this period, the LEDs will settle into one of a few common states as described below. RN Installation Guide vIG_RN_CBRS_2021-08 — 16 Tarana Wireless, Inc. ©2021. All rights reserved.
-
Page 18: Logging Into The Rn
Mbps Ethernet port to the Ethernet port of the PoE powering the RN. Assign a static IP address of 192.168.10.10 to the laptop’s Ethernet port. Step 2. RN Installation Guide vIG_RN_CBRS_2021-08 — 17 Tarana Wireless, Inc. ©2021. All rights reserved. -
Page 19: Verify Connectivity
Verify Connectivity In the management interface, verify the RN is connected to Tarana Cloud Suite (TCS) by confirming that the hostname of the RN at the top of the screen is in green text. The received signal strength from the BN can also be verified here. -
Page 20: Warranty
Warranty Tarana warrants that commencing from the date of shipment to you (and in case of resale to you by a Tarana partner, commencing not more than 90 days after our original shipment), and continuing for a period of twelve (12) months, the hardware will be free from defects in material and workmanship under normal use. This limited warranty is not transferrable.
Need help?
Do you have a question about the GIGABIT 1 and is the answer not in the manual?
Questions and answers