Advertisement
Important advice for installation / configuration of your GATEWAY 500
Please read these advices first – before installation!
1. Configuration of the DIP switches on the GATEWAY 500 interfaces
Before shipping, we configured your GATEWAY 500 to „Porsche" – mode, depending on the car radio /
navigation system you choose with your order.
Please double check the GATEWAY 500 interface again before installation, whether the DIP switches are
in the correct position.
navigation system PCM2, PCM2.1, PCM2 DVD
DIP-switch 2 and 3 are in the upper „ON" position
DIP-switch 2 and 3 are in the lower „OFF"
position
pic. 1
2. Installation of GATEWAY 500 in front of PCM / CD changer
The GATEWAY 500 interface shall be integrated into the optical MOST ring of Porsche Cayenne in front
of the PCM.
In all other compatible Porsche models with optical MOST BUS (Boxster, Cayman and 911), the
GATEWAY 500 interface must be integrated into the optical ring after the PCM / CDR unit and in front of
the CD changer, like shown in pic. 1, page 2 in the English installation guide (DENSION
The pictures 4b and 5 on page 3 might raise the impression, the GATEWAY 500 interface is meant to be
installed into the optical line-out cable after the CD-changer. This is not valid for Porsche systems; please
ignore picture 4b and 5 on p. 3 regarding the optical ring direction.
3. Configuration of the CD text display – GATEWAY 500
Amendatory explanation to the DENSION user manual (2. Configuration)
The GATEWAY 500 enables display of song and artist information (CD text) on the screen of the
navigation systems PCM. The CDR radio devices are not text capable.
In order to apply the full potential of the screening possibilities you have to proceed the following
configurations after installation of the GATEWAY 500.
powered by
for Porsche with MOST bus
DIP-switch 4 is in the upper „ON" position
DIP-switch 1, 2 and 3 are in the lower „OFF"
position
maxxcount.de
car radio: CDR23, CDR24
Advertisement
Table of Contents
Related Manuals for Dension GATEWAY 500
Summary of Contents for Dension GATEWAY 500
- Page 1 In all other compatible Porsche models with optical MOST BUS (Boxster, Cayman and 911), the GATEWAY 500 interface must be integrated into the optical ring after the PCM / CDR unit and in front of the CD changer, like shown in pic. 1, page 2 in the English installation guide (DENSION The pictures 4b and 5 on page 3 might raise the impression, the GATEWAY 500 interface is meant to be installed into the optical line-out cable after the CD-changer.
- Page 2 Some car navigation system-models are „only“ CD text capable, but most types are list capable as well. After installation of the GATEWAY 500 and first time activation of the iPod, the title of the first Playlist / first song or just “Track 1” appears on the display of CD text capable devices. Additionally, the list capable radios / navigation systems show a list below this first title, which only indicates track 2, track 3 and so on.
- Page 3 8. If you determined (under step 2.) that ID3 tags where not displayed (CD text), please start with the configuration with (TEXT) 2/5 (pic. 4) and go on with (+CACHE) 3/5. Is your PCM already text- capable, start with the option (+CACHE) 3/5.
Need help?
Do you have a question about the GATEWAY 500 and is the answer not in the manual?
Questions and answers