Related Manuals for PV-ezRack PostMount 1-A
Summary of Contents for PV-ezRack PostMount 1-A
- Page 1 PostMount 1-A with ECO-Rail Code-Compliant Planning and Installation Guide V 2.2 Complying with AS/NZS1170.2: 2011 ADMT 4-2016 Last Updated - Mar. 2022...
-
Page 2: Table Of Contents
1-A has been developed to fit any PV module in the Product Introduction outdoors and uneven ground areas. PV-ezRack® Tools & Components PostMount 1-A have good compatibility for the different System Overview 03 - 05 region via the angle adjustment (10°~60°). Using high... -
Page 3: Tools & Components
Installation Guide / PostMount 1-A with ECO-Rail Tools and Components Tools Allen Key 6 mm Spanner Torque Wrench 5m Tape Components COP-PM1A-01 ER-P-83/2400 ER-EC-ST PM1-A Components Pole for PostMount 1-A, End Clampx4 Packx1 Ø83x2400mmx1 - Tools and Components - Code-Compliant Planning and Installation Guide V 2.2 - Complying with AS/NZS1170.2: 2011 ADMT 4-2016... -
Page 4: System Overview
3. End Clamp Side view drawing of PV-ezRack® PostMount 1-A is shown below. The panels tilt angle and embedment depth below are for reference only. Please refer to Certificate Letter to obatin the certified max panels tilt angle and min embedment depth for different wind regions and different soil types. - Page 5 Installation Guide / PostMount 1-A with ECO-Rail 2. Precautionary Measures for Stainless-Steel Fastener Installation Improper operation may lead to the deadlock of bolts and nuts. Follow the steps below to reduce this risk. Reduce the friction coefficient (1) Ensure that the thread surface is clean (no dirt or contaminant).
- Page 6 Avoid damaging the anodized or galvanized surfaces. 3. Installation Dimensions All drawings and dimensions in this installation guide are for generic reference. The PV-ezRack® PostMount 1-A is to be optimized to suit specific conditions for each project and documented in engineering drawings. As a result, major components of the PV-ezRack®...
-
Page 7: Installation Instruction
Installation Guide / PostMount 1-A with ECO-Rail Installation Instructions 1. Pole 83*2400 Installation Dig a hole to the diameter 300-400mm and depth 1200-1400mm highlighted in the PM1-A engineering letter. Cover the bottom of the hole with 50-70mm gravel. Cement mortar Place the pole into the middle of the hole and fill it with concrete. - Page 8 Installation Guide / PostMount 1-A with ECO-Rail 2) As show in figure on the right, place the ECO-Rail on Angle Steel. Use the Cross Connection Clamp, Cup head square neck bolts M8*25, Hexagon nut with flange M8 to lock on the Angle Steel 63 * 40 * 1010.
-
Page 9: Certification
Gamcorp (Melbourne) Pty Ltd, being Structural Engineers within the meaning of Australian Regulations, have carried out a structural design check of the PV-ezRack Postmount PM1-A for installation in four general soil types within Australia and New Zealand. The design check has been based on the drawings of the system and its components, and other documents and information, provided by CLENERGY AUSTRALIA. - Page 10 Installation Guide / PostMount 1-A with ECO-Rail Gamcorp (Melbourne) Pty Ltd A.C.N 141 076 904 A.B.N 73 015 060 240 www.gamcorp.com.au melbourne@gamcorp.com.au Suite 4, 346 Ferntree Gully Rd, Notting Hill VIC 3168 Tel: 03 9543 2211 Table 1 – Maximum Tilt Angle and Footing Options...
- Page 11 Installation Guide / PostMount 1-A with ECO-Rail Gamcorp (Melbourne) Pty Ltd A.C.N 141 076 904 A.B.N 73 015 060 240 www.gamcorp.com.au melbourne@gamcorp.com.au Suite 4, 346 Ferntree Gully Rd, Notting Hill VIC 3168 Tel: 03 9543 2211 Notes: 1. This certification is applicable for the Postmount PM1-A with dimensions as shown in this letter.
- Page 12 Clenergy 1/10 Duerdin St Phone: +61 3 9239 8088 Clayton VIC 2168 Email: sales@clenergy.com.au Australia Web: www.clenergy.com.au @ClenergyGlobal / @ClenergyClub / ClenergyAUS @Clenergy @ClenergyClub @Clenergy_global @Clenergy A Clenergy Technologies Company...
Need help?
Do you have a question about the PostMount 1-A and is the answer not in the manual?
Questions and answers