Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Makita XMT035
Summary of Contents for Makita XMT035
- Page 1 INSTRUCTION MANUAL Cordless Multi Tool XMT03 014551 IMPORTANT: Read Before Using.
-
Page 2: Specifications
SPECIFICATIONS Model XMT03 Oscillation per minute 6,000 - 20,000 /min 1.6 ﾟ (3.2 ﾟ total) Oscillation angle, left/right Standard battery cartridge BL1830/BL1840 BL1815/BL1815N * Overall length 340 mm (13-3/8") 326 mm (12-7/8") Net weight 2.2 kg (4.9 lbs) 2.0 kg (4.4 lbs) Rated voltage D.C. - Page 3 15. Dress properly. Do not wear loose clothing or 26. When battery pack is not in use, keep it away jewellery. Keep your hair, clothing, and gloves from other metal objects, like paper clips, away from moving parts. Loose clothes, coins, keys, nails, screws or other small metal jewellery or long hair can be caught in moving objects, that can make a connection from one...
- Page 4 Do not leave the tool running. Operate the tool 23. Do not run the power tool while carrying it at only when hand-held. your side. Accidental contact with the accessory 10. Always switch off and wait for the blade to could snag your clothing, pulling the accessory come to a complete stop before removing the into your body.
-
Page 5: Functional Description
If electrolyte gets into your eyes, rinse them FUNCTIONAL DESCRIPTION out with clear water and seek medical attention right away. It may result in loss of your eyesight. WARNING: Do not short the battery cartridge: Always be sure that the tool is switched off •... -
Page 6: Overheat Protection
Battery protection system CAUTION: (Lithium-ion battery with star marking) Before installing the battery cartridge into the tool, • always check to see that the tool is switched off. To start the tool, slide the slide switch toward the "I 1. Star marking (ON)"... -
Page 7: Operation
ASSEMBLY CAUTION: Always be sure that the tool is switched off and the • battery cartridge is removed before carrying out any work on the tool. Installing or removing application tool (optional accessory) 014564 When using sanding application tool, mount the WARNING: application tool on the sanding pad so that it matches Do not install application tool upside down. - Page 8 Dust extraction attachment (optional accessory) 014559 Put the application tool on the workpiece. And then move the tool forward so that the application tool movement does not slow down. NOTE: Forcing or excessive pressure on the tool may • reduce efficiency. Before cutting operation, it is recommended to •...
-
Page 9: Maintenance
Only use accessory or attachment for its stated purpose. If you need any assistance for more details regarding these accessories, ask your local Makita Service Center. Segment saw blade • Round saw blade • Plunge cut saw blade •... - Page 10 To reduce your exposure to these ch emicals: work in a well ventilated area, and work with approved safety equipment, such as those dust masks that are specially designed to filter out microscopic particles. View other power tools made by Makita on our website.
Need help?
Do you have a question about the XMT035 and is the answer not in the manual?
Questions and answers