Yealink EHS 40 Setup Manual
  1. Manuals
  2. Brands
  3. Yealink Manuals
  4. Adapter
  5. EHS 40
  6. Setup manual

Yealink EHS 40 Setup Manual

Setup for jabra
Hide thumbs
1
2
3
4
5
6

Advertisement

Table of Contents

Yealink EHS 40 Setup Guide
for Jabra.
The EHS 40 is designed to work with Jabra, Plantronics and Sennheiser headsets.
So not all cables that come in the box are required. Please pay close attention
to the next couple of pages to ensure you are using the right cables for your
chosen headset. This manual is only for the model headset you have purchased
so will not talk about all the cables.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the EHS 40 and is the answer not in the manual?

Questions and answers

Related Manuals for Yealink EHS 40

Summary of Contents for Yealink EHS 40

  • Page 1 Yealink EHS 40 Setup Guide for Jabra. The EHS 40 is designed to work with Jabra, Plantronics and Sennheiser headsets. So not all cables that come in the box are required. Please pay close attention to the next couple of pages to ensure you are using the right cables for your chosen headset.
  • Page 2 For a Jabra Headset you will need: EHS 40 box – And the Jabra Y cable – To set your Jabra headset and EHS 36 up:...
  • Page 3 Jabra Y cord plugs into the plug on the left on the EHS 40 box. The USB cable on the other side of the EHS 40 box then plugs into the USB port in the back of your telephone.
  • Page 4 You will then need to program the headset to tell it which ehs you are using. If you have a Jabra Pro 920 or Pro 925 follow these instructions. Put on the headset, and simultaneously press and hold both volume buttons (+) and (-) on the top of the headset until the Voice prompt says “Set up”...
  • Page 5 If you are using a Jabra pro 9460/9470 /Motion office; follow these instructions: With the headset sitting on the base please press the spanner in the top right corner. use the arrow to scroll down to phone settings then click that. click on desk phone click on setup desk phone It will bring up a message saying you will be unable to make calls.
  • Page 6 If you are using an Engage 75 please use these instructions: The easiest way to change settings on the Engage 75 headset is via the Jabra direct software. This is free to download from https://www.jabra.com.au/software-and-services/jabra-direct Once this has been downloaded and your headset is plugged into the PC you will be able to go directly into the headset settings and select the EHS/Hook lifter type.

Table of Contents