Table 36 Tightening Torque (61059 / 42128 / 86505 / 25013) - ABB HT568964 Operation Manual

Operation Manual / 4 Product description / A100-M axial
8 Disassembly and assembly
Figure 48: Installing the cartridge group 2
Part number
61059 / 42128
86505
25013
Table 36: Tightening torque (61059 / 42128 / 86505 / 25013)
1. Coat thread of screw (61059) and two bolts for the nuts (42128) with high-temperature
grease.
2. Secure cartridge group with screw (61059) and nuts (42128).
3. Fit spinner nose cone (25012) with screw (25013) and washer (25014) and tighten.
4. Remove the lifting gear.
5. Screw in and tighten speed sensor (86505) with new O-ring (86506).
6. Insert cable connector (86515).
© Copyright 2016 ABB. All rights reserved.
A170-M
M22
415 Nm
M18x1.5
150 Nm
M8
20 Nm
HZTL4033_EN
Page 78 / 113
A175-M
M24
490 Nm
M18x1.5
150 Nm
M10
40 Nm
Revision A July 2016