Installing The Turbocharger - ABB HT564586 Operation Manual

Operation Manual / 4 Product description / A100-L
2 Removal and installation
2.3

Installing the turbocharger

2.3.1 Placing the turbocharger on the bracket
Figure 5: Placing the turbocharger on the bracket
Remove covers from the oil connections.

Align turbocharger and place on engine bracket.

Tighten fixing screws (Steps for fastening the turbocharger [➙ 14]); while doing this, only

slightly loosen the lifting gear.
Remove lifting gear from suspension eyes of the bearing casing.

Connect cable to speed sensor.

Connect all gas, air and oil pipes.

© Copyright 2016 ABB. All rights reserved. HZTL4034_EN
Page 13 / 111
Revision F June 2016