ABB HT613041 Operation Manual page 59

Operation Manual / A150-M56/66/57/67 - A155-M..
6 Operation and service / 6.3 Expected replacement intervals
Influencing parameters
The specified values are guideline values and are not guaranteed. The actual values can devi-
ate considerably from the guideline values, for example, due to the following influences:
¡
Fuel quality and fuel treatment
¡
Load profile (thermal cycling, also number of starts/stops, emergency shutdowns, oper-
ating point)
¡
Gas inlet temperature
¡
Frequency and execution of cleaning process during operation
¡
Turbocharger specification.
¡
System-specific operating conditions (combustion quality, exhaust gas composition)
For bearing parts
¡
Lubricating oil quality (oil filtering, oil condition, oil monitoring)
¡
Load profile (speed, pressure conditions, temperature)
¡
Number of starts/stops
¡
Unbalance of the rotor (degree of contamination).
© Copyright 2022 ABB. All rights reserved. HZTL4032_EN Rev.S February 2022