Initial System Configuration
Note
Passwords are case sensitive.
The default password for all levels is "cisco".
Note
To change the passwords, complete the following steps:
Step 1
Step 2
Step 3
Step 4
E
XAMPLE
Following is an example of changing all passwords. Password encryption is not enabled (default).
Enter a User password [cisco]: userin
Enter an Admin password [cisco]: mng123
Enter a Root password [cisco]: cistech
Enable passwords encryption? [no]:
Step 4: Configuring Time Settings
The time settings menu configures all time and date related parameters in the system. The time
settings menu includes the following:
•
•
•
•
SCE 2000 4xGBE Installation and Configuration Guide
5-8
Chapter 5
Connecting the Management Interfaces and Performing Initial System Configuration
The default User password is displayed.
To accept the displayed value, press Enter.
•
To change the value, type the desired string and press Enter.
•
The default Admin password is displayed.
To accept the displayed value, press Enter.
•
•
To change the value, type the desired string and press Enter.
The default Root password is displayed.
To accept the displayed value, press Enter.
•
To change the value, type the desired string and press Enter.
•
Configure password encryption. By default, password encryption is not enabled.
•
To disable password encryption, press Enter.
•
To enable password encryption, type y and press Enter.
:
Time zone
Local time
Date
SNTP menu
OL-7824-02