Chapter 2. Important Service Information; Strategy For Replacing Frus; Strategy For Replacing A Solid-State Drive; Important Notice For Replacing A System Board - Lenovo ThinkSmart Hardware Maintenance Manual

Chapter 2. Important service information

Strategy for replacing FRUs

Before replacing parts:
Ensure that all software fixes, drivers, and UEFI BIOS downloads are installed before you replace any FRUs
listed in this manual.
After a system board is replaced, ensure that the latest UEFI BIOS is loaded to the system board before you
complete the service action.
To download and install software fixes, drivers, and UEFI BIOS, go to
the instructions on the screen.
Use the following strategy to prevent unnecessary expense for replacing and servicing FRUs:
• If you are instructed to replace a FRU but the replacement does not correct the problem, reinstall the
original FRU before you continue.
• If an adapter or a device consists of more than one FRU, any of the FRUs might be the cause of the error.
Before replacing the adapter or device, remove the FRUs, one by one, to see if the symptoms change.
Replace only the FRU that changed the symptoms.

Strategy for replacing a solid-state drive

Always try to run a low-level format operation before replacing a solid-state drive. This will cause all
customer data on the drive to be lost. Ensure that the customer has a current backup of the data before you
perform this task.
Attention: The drive startup sequence in the hub you are servicing might have been changed. Be extremely
careful during write operations such as copying, saving, or formatting. If you select an incorrect drive, data or
programs can be overwritten.

Important notice for replacing a system board

Some components mounted on a system board are very sensitive. Improper handling of a system board can
cause damage to those components, and may cause a system malfunction.
Attention: When handling a system board:
• Do not drop a system board or apply any excessive force to it.
• Avoid rough handling of any kind.
• Avoid bending a system board and hard pushing to prevent cracking at each Ball Grid Array (BGA)
chipset.

How to use error codes

Use the error codes displayed on the screen to diagnose failures. If more than one error code is displayed,
begin the diagnosis with the first error code. Whatever causes the first error code might also cause false error
codes. If no error code is displayed, see whether the error symptom is listed in the "Symptom-to-FRU Index"
section.
© Copyright Lenovo 2020
https://pcsupport.lenovo.com and follow
27