Page 1
User Manual HyperX Cloud II Wireless Find the language and latest documentation for your HyperX Cloud II Wireless here. HyperX Cloud II Wireless Installation Guide . . . . . . . . . . . . For instructions in English .
Page 2
HyperX Cloud II Wireless Part Numbers HHSC2X-BA-RD/G Document No. 480HX-HHSC2X.A01 HyperX Cloud II Wireless Page 1 of 13...
Volume wheel ................................ 11 Status LED ................................10 Charging the Headset ......................12 Wired charging ..............................12 HyperX NGENUITY Software ....................12 Manually Pairing the Headset and USB Adapter ..............13 Document No. 480HX-HHSC2X.A01 HyperX Cloud II Wireless Page 2 of 13...
C. Microphone port USB adapter D. Status LED J. Wireless pairing pin hole E. Power / 7.1 Surround Sound button K. Wireless status LED F. Volume wheel L. USB charge cable Document No. 480HX-HHSC2X.A01 HyperX Cloud II Wireless Page 3 of 13...
30 hours Wireless Range** 2.4 GHz Up to 20 meters *Tested at 50% headphone volume. Battery life varies depending upon the usage. **Wireless range may vary due to environmental conditions. Document No. 480HX-HHSC2X.A01 HyperX Cloud II Wireless Page 4 of 13...
1. Connect the wireless USB adapter to the PC. 2. Power on the headset. 3. Right click speaker icon > Select Open Sound settings > Select Sound Control Panel Document No. 480HX-HHSC2X.A01 HyperX Cloud II Wireless Page 5 of 13...
Page 7
4. Under the Playback tab, click on “HyperX Cloud II Wireless” and click on the Set Default button. 5. Right click on “HyperX Cloud II Wireless” and click on Configure Speakers. Document No. 480HX-HHSC2X.A01 HyperX Cloud II Wireless Page 6 of 13...
Page 8
6. Select 7.1 Surround as the speaker configuration and click next. 7. Under the Recording tab, click on “HyperX Cloud II Wireless” and click on the Set Default button. Document No. 480HX-HHSC2X.A01 HyperX Cloud II Wireless Page 7 of 13...
Page 9
8. Under the Playback tab, verify that “HyperX Cloud II Wireless” is set as Default Device and Default Communication Device. Under the Recording tab, verify that “HyperX Cloud II Wireless” is set as Default Device. Document No. 480HX-HHSC2X.A01 HyperX Cloud II Wireless...
Setting up with PlayStation 4 1. Set Input Device to USB Headset (HyperX Cloud II Wireless) 2. Set Output Device to USB Headset (HyperX Cloud II Wireless) 3. Set Output to Headphones to All Audio 4. Set Volume Control (Headphones) to maximum.
• Press to toggle mic mute on/off o LED On – Mic muted o LED Off – Mic active • Hold for 3 seconds to toggle mic monitoring on/off Document No. 480HX-HHSC2X.A01 HyperX Cloud II Wireless Page 10 of 13...
Volume wheel • Scroll up and down to adjust volume level WARNING: Permanent hearing damage can occur if a headset is used at high volumes for extended periods of time Document No. 480HX-HHSC2X.A01 HyperX Cloud II Wireless Page 11 of 13...
< 15% battery level Wired charging To charge the headset via wired, plug the headset to a USB port with the USB charge cable. HyperX NGENUITY Software Download NGENUITY software at: hyperxgaming.com/ngenuity Document No. 480HX-HHSC2X.A01 HyperX Cloud II Wireless Page 12 of 13...
3. Wait until both the headset LED and the USB adapter LED are solid. The headset and USB adapter are now paired together. Questions or Setup Issues? Contact the HyperX support team at: hyperxgaming.com/support/ Document No. 480HX-HHSC2X.A01 HyperX Cloud II Wireless...
Page 15
HyperX Cloud II Wireless Quick Start Guide Gaming Headset Overview Mic mute/mic monitoring button USB charge port Microphone port Status LED Power button / 7.1 Surround Sound button Volume wheel Detachable microphone Microphone mute LED USB adapter Wireless pairing pin hole...
Page 16
Usage 1. Connect the wireless USB adapter to your device 2. Power on the headset Setting up with PC Right click speaker icon > Select Open Sound settings > Select Sound control panel Settings Open Sound settings Sound Open Volume mixer Display Related Settings Spatial sound (Off)
Page 17
1. Set Default Device to “HyperX Cloud II Wireless” Set Default Device to “HyperX Cloud II Wireless” 2. Right click on “HyperX Cloud II Wireless” and click on Con gure. Select 7.1 Surround to con gure your setup and click next.
Page 18
Status LED Volume wheel Scroll up and down to adjust volume level. STATUS WARNING: Permanent hearing damage can occur if a headset is used at high volumes for extended periods of time. Pairing Flash Green and Red every 0.2s Searching Slow breathing Green 90% —...
Page 19
HyperX NGENUITY Software hyperxgaming.com/ngenuity Questions or Setup Issues? Contact the HyperX support team or see the user manual at : hyperxgaming.com/support/headsets...
Page 20
Playback Device 1. Set Default Device to “HyperX Cloud II Wireless” Wired Charging 2. Right click on “HyperX Cloud II Wireless” and click on Con gure. HyperX NGENUITY Software 3. Select 7.1 Surround to con gure your setup and click next.
Page 21
MN: CL002 subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause MN: CL002WA undesired operation of the device. Battery/TX Power Info Avis Canadian Cet appareil numérique de la classe B est conforme à...
Need help?
Do you have a question about the Cloud II Wireless and is the answer not in the manual?
Questions and answers