Advertisement
Table of Contents
GX Installation Guide
This document describes how to install and set up the GX50 VPN
Firewall. Additional reference documents are available online
at
www.meraki.com/library/products
material if necessary.
GX50 Overview
The Meraki Go GX50 is a VPN Firewall built for small
business deployments that require remote administration. It is ideal for
network administrators who demand both ease of deployment and a
state-of-the-art feature set for managing retail locations or small
businesses. A full overview of the appliances' features can be found in
the GX50 overview and features page.
Package Contents
In addition to the GX50 device, the following are provided:
Power Adapter (No Power Cable)
1x CAT5 Ethernet Cables
Wall Screws and Anchors
Front Panel
Status Indicator
The GX50 series devices uses an LED to inform the user of the device's status. LED patterns and their meanings are
which may help supplement this
1
Advertisement
Table of Contents
Related Manuals for Cisco MERAKI GX50
Summary of Contents for Cisco MERAKI GX50
- Page 1 In addition to the GX50 device, the following are provided: Power Adapter (No Power Cable) 1x CAT5 Ethernet Cables Wall Screws and Anchors Front Panel Status Indicator The GX50 series devices uses an LED to inform the user of the device's status. LED patterns and their meanings are...
-
Page 2: Back Panel
Firmware upgrade in progress Fully operational/connected, uplink actively using wired Solid White Back Panel GX50 Back Panel Functions Additional functions on the back panel are described below, from left to right. USB port Powered USB for charging devices. WAN / Internet port This port provides connectivity to/from the Internet. -
Page 3: Bottom Panel
Bottom Panel Please note that the serial number is located on the product label at the bottom panel of the GX50. Mounting Hardware The supplied wall screws and anchors allow you to mount the appliance on a drywall surface, either vertically or horizontally. -
Page 4: Additional Settings
To ensure that the client PC is redirected to the local web service in the following step, you must disable all other network services (eg: wi-fi) on your client machine. Do the following to configure basic connectivity and other networking parameters: 1. - Page 5 • Enter values as appropriate for Hostname or IP and Port. • If you require authentication, choose Authentication > Use authentication, and enter appropriate values for Username and Password. To apply all configuration settings to the appliance, be sure to click Save Settings at the bottom of the page. Configuring Physical Link Settings To configure physical link settings on the Ethernet ports, click Local status >...
Need help?
Do you have a question about the GX50 and is the answer not in the manual?
Questions and answers