Related Manuals for Beko BFL104ADW
Summary of Contents for Beko BFL104ADW
- Page 1 Washing Machine User Manual BFL104ADW Document Number= 2820529467_EN/ 24-06-21.(14:35)
-
Page 2: General Safety Instructions
General safety instructions This section contains safety instructions that will help protect from risk of personal injury or property damage. Failure to follow these instructions shall void any warranty. 1.1 Life and property safety Never place the product on a carpet-covered floor. Otherwise, lack of airflow beneath the machine will cause electrical parts to overheat. -
Page 3: Electrical Safety
trained on the safe usage of the product and the risks it brings out. Children should not play with the product. Cleaning and maintenance works should not be performed by children unless they are supervised by someone. Children under the age of 3 should be kept away unless continuously supervised. Packaging materials are dangerous for the children. -
Page 4: Important Instructions For Environment
Important instructions for environment 2.1 Compliance with WEEE Directive This product complies with EU WEEE Directive (2012/19/EU). This product bears a classification symbol for waste electrical and electronic equipment (WEEE). This product has been manufactured with high quality parts and materials which can be reused and are suitable for recycling. -
Page 5: Technical Specifications
Technical specifications Supplier name or trademark Beko Model name BFL104ADW Rated capacity (kg) Maximum spin speed (rpm) 1400 Built-in Height (cm) Width (cm) Depth (cm) Single Water inlet / Double Water inlet • / - • Available Electrical input (V/Hz) -
Page 6: Appropriate Installation Location
4.1 Installation • Preparation of the location and electrical, tap water and waste water installations at the place of installation is under customer's responsibility. • Make sure that the water inlet and discharge hoses as well as the power cable are not folded, pinched or crushed while pushing the product into its place after installation or cleaning procedures. -
Page 7: Connecting Water Supply
4.1.4 Connecting water supply It is necessary to have 10 – 80 liters of water flowing from the fully open tap in one minute to have your machine run smoothly. Attach a pressure reducing valve if water pressure is higher. It is also recommended to attach a pressure reducing valve if you experience overflow from the detergent dispenser during water fill between 3.5 to 10 bars (0.35 to 1 MPa). -
Page 8: Adjusting The Feet
4.1.6 Adjusting the feet CAUTION: In order to ensure that the product operates more silently and vibration-free, it must stand level and balanced on its feet. Balance the machine by adjusting the feet. Otherwise, the product may move from its place and cause crushing and vibration problems. -
Page 9: Preparing Laundry For Washing
4.2 Preparation 4.2.1 Sorting the laundry • Sort laundry according to type of fabric, colour, and degree of soiling and allowable water temperature. • Always obey the instructions given on the garment tags. 4.2.2 Preparing laundry for washing • Laundry items with metal attachments such as, underwiring, belt buckles or metal buttons will damage the product. -
Page 10: Using Detergent And Softener
4.2.6 Using detergent and softener When using detergent, softener, starch, fabric dye, bleach and descaling agents to be added through the detergent container 2, read the manufacturer's instructions written on the package and follow the dosages specified. Use a measuring cup, if any. For programmes where liquid detergent dosing is selected, do not add any powder detergent. - Page 11 Adding Liquid Detergent and Softener • Pull the detergent drawer towards yourself to open it. • To add liquid detergent (left) and softener (right), open the lid of the relevant container upwards as shown in the image. • When adding liquid detergent or softener, do not exceed the tip of the «Max»...
- Page 12 • The machine will measure the load, and determine the detergent amount depending on the load amount and selected functions. During the washing operation, the detergent intake is not visible, it will be taken in directly with the water. • If it is requested to use powder detergent in programmes where detergent dosing system activates required amount of powder detergent should be added to the detergent compartment.
-
Page 13: Tips For Efficient Washing
4.2.7 Tips for efficient washing Clothes Light Colours and Black/Dark Delicates/ Colours Whites Colours Woolens/Silks (Recommended (Recommended (Recommended temperature (Recommended temperature range temperature range temperature range range based on soiling level: based on soiling level: 40-90 based on soiling level: based on soiling level: cold -40 cold -40... -
Page 14: Operating The Product
4.3 Operating the product 4.3.1 Control panel 1 - Programme selection knob 7 - End Time Adjustment Button 2 - Temperature level lights 8 - Auxiliary function button 3 3 - Spin level indicator lights 9 - Auxiliary function button 2 4 - Display 10 - Auxiliary function button 1 5 - Start/Pause Button... -
Page 15: Programme And Consumption Table
Data required for performance tests shall be provided upon request. Requests can be e-mailed to the following address: info.australialaundry@beko.com Do not forget to provide the code, stock and serial numbers of the product to be tested in your request e-mail along with your contact information. -
Page 16: Programme Selection
The auxiliary functions in the table may vary according to the model of your machine. Water and power consumption may vary subject to the changes in water pressure, water hardness and water temperature, ambient temperature, type and amount of laundry, selection of auxiliary functions and spin speed, and changes in the mains voltage. When selecting a programme, you can see the washing duration on the display of your machine. - Page 17 • Anti-Allergy+ Use this programme for your laundry (baby clothes, bed sheets, bedlinen, underwear, etc. cotton items) that requires an anti-allergy and hygienic washing at high temperature with intensive and long washing cycle. Steam vapour is automatically applied at the beginning of the program and helps the dirt to soften easily. The high level of hygiene is ensured thanks to the steam application before the program, long heating duration and additional rinsing step.
- Page 18 • Auto Program Use to wash frequently washable cotton, synthetic or blended (cotton+synthetic) clothes. Programme detects the type and quantity of the laundry to automatically adjust water consumption and programme time. WARNING: Do not wash your woolen and delicate clothes in this programme. If the temperature on the temperature indicator is not in compliance with the warnings on the tag of the laundry, select a suitable temperature.
-
Page 19: Temperature Selection
• Select the stain programme. • In the stain groups stated above, find the type of stain you want to remove and select the quick auxiliary function selection key to select the relevant group. • Carefully read the tag of the clothing and make sure that the temperature and spin speed selected are suitable. -
Page 20: Rinse Hold
This function holds the laundry in the final rinsing water. If you want to spin your laundry after the Rinse Hold function: - Adjust the Spin Speed. - Press Start/Pause/Cancel. Programme will resume. The machine will drain the water and spin the clothes. If you want to drain the water at the end of the programme without spinning, you can use the No Spin function. - Page 21 • Steam Use this function to reduce the creases and ironing time of a small amount of cotton, synthetic or mixed laundry. This function can be selected on the following cycles (See 4.3.12 Programme and consumption table): Cottons, Synthetics, Daily-Quick / Quick 14’, Daily-Quick / Quick 14’ + Fast+, Bedding & Blanket, Shirts, Mix, Dark Care / Jeans, Towel.
-
Page 22: To Enable Bluetooth
• Child lock You can use the Child Lock to prevent children from tampering with the machine. Thus you can avoid any changes in a running programme. When the Child Lock is enabled, you can press the On/Off button to switch the machine on or off. Programme resumes when you start the machine again. -
Page 23: Starting A Programme
If you want to cancel the End Time function, turn the knob to on/off position. If you enable the End Time function, do not add liquid detergent into the powder detergent compartment 2. Stains might remain on the clothes. 1 Open the loading door, place the laundry and put detergent, etc. 2 Select the washing programme, temperature, spin speed and, if required, the auxiliary functions. -
Page 24: Switching The Machine To Pause Mode
• Turn off and unplug the appliance. • Open the pump filter lid. • Remove the loading door emergency handle behind the filter cover with a tool. • Open the loading door by pulling the loading door emergency handle downwards. •... -
Page 25: Cancelling The Programme
Changing the programme selection after the programme has started: If Child Lock is not enabled, you can change programme by turning the programme selection knob while the current programme is running. This will cancel the current programme. The selected programme will start anew. Changing the auxiliary function, speed and temperature Depending on the step the current programme has reached, you can cancel or enable auxiliary functions. - Page 26 4.3.15.1 HomeWhiz Setup Your product and the HomeWhiz app must be connected for the app to run. To establish this connection, please follow the steps below for setup both on your product and on the HomeWhiz App. If you are adding an appliance for the first time, tap “Add/Remove Appliance” on the HomeWhiz App. •...
-
Page 27: Using The Remote Control Function
4.3.15.3 Using the Remote Control function After HomeWhiz setup, Bluetooth will turn on automatically. To enable or disable the Bluetooth connection, please see 4.3.8.2 Bluetooth 3’’’. If you switch your machine off and on while Bluetooth is enabled, it will reconnect automatically. If the paired device goes out of the range, the Bluetooth connection will turn off automatically. -
Page 28: Maintenance And Cleaning
4.4 Maintenance and cleaning Service life of product extends and frequently experienced problems will be reduced if it is cleaned at regular intervals. 4.4.1 Cleaning the detergent drawer When to clean • If you see hardened, viscous detergent or softener when you open the dosing container lid, •... -
Page 29: Cleaning The Loading Door And The Drum
• Use a flat screwdriver to remove the tabs holding the upper cover of the detergent drawer (there are 6 tabs in total: two on the right side of the drawer, two on the left and two at the back) and wash the inside of the drawer. -
Page 30: Draining Remaining Water And Cleaning The Pump Filter
Close the taps. Remove the nuts of the water intake hoses to access the filters on the water intake valves. Clean them with an appropriate brush. If the filters are too dirty, remove them from their places with a pliers and clean in this way. -
Page 31: Troubleshooting
Troubleshooting Problem Cause Solution Programs do not start after the Start / Pause / Cancel button is not pressed. • *Press Start / Pause / Cancel button. loading door is closed. It may be difficult to close the loading door in case of •... - Page 32 Problem Cause Solution Washing takes longer than Water pressure is low. • Product waits until taking in adequate amount specified in the user manual.(*) of water to prevent poor washing quality due to the decreased amount of water. Therefore, the washing time extends.
- Page 33 Problem Cause Solution Washing performance is poor: Insufficient amount of detergent is used. • Use the recommended amount of detergent Stains persist or the laundry is not appropriate for water hardness and the laundry. whitened. (**) Excessive laundry is loaded in. •...
- Page 34 Problem Cause Solution Detergent residue in the detergent Detergent was put in wet drawer. • Dry the detergent drawer before putting in drawer. (**) detergent. Detergent has gotten damp. • Keep detergents closed in an environment free of humidity and do not expose them to excessive temperatures.