Installation And Adjustment - Haier HWM80-68B User Manual

Installation and adjustment

Please install and adjust the machine according to the requirement of the manual. It is
very important to your security and correct operating the machine.
Install the bottom plate
After opening the package, please lean the
washing machine gently down on soft items
(like towel cloth, blanket, etc.). Install the
bottom plate to the bottom of the machine
with eight screws by a cross screwdriver,
then lift the machine up gently. See to the
figure:
Adjust the installation position
The largest allowable slope of the shank base of the machine is 2 .
The slanting or rough ground will result in unstable running or
stoppage of the machine. Please adjust it with following methods:
Confirm it's horizontal:
If the bulb of the level meter at the balance display
position is inside the standard circle, it indicates that
the machine is horizontal. Otherwise you need to
a d j u s t t h e a d j u s t a b l e l e g o f t h e m a c h i n e .
Adjust the adjustable leg:
1.To twist the adjustable leg, please first lift up the
leg side slightly, loosen the adjustable nut, and
then twist the leg.
2.After adjustment, fasten the nut.
Bottom plate
Screw
Suitable
Loosen
High
Back
Front
Soft items
Air bubble
Not suitable
Standard circle
Adjustable nut
Fasten
Adjustable leg
Low