Warning Plates On The Turbocharger - ABB HT574400 Operation Manual

Operation Manual / 4 Product description / A100-M axial
1 Introduction
1.5

Warning plates on the turbocharger

Warning plates are attached at the following locations:
Figure 3: Warning plates on the turbocharger
If warning plates are not present in the designated locations or not readable, proceed as follows:
Order new warning plates from ABB Turbocharging Service Stations.

Remove any warning plates that have become unreadable.

Clean and degrease the areas designated for the warning plates.

Fit new warning plates and remove protective sheets.

Turbochargers supplied to the enginebuilder without insulation must be fitted later with warn-
ing plates to be attached to the insulation. This is the responsibility of the enginebuilder.
© Copyright 2016 ABB. All rights reserved. HZTL4033_EN
Page 6 / 113
Revision A July 2016