power King 60-013 Owner's Manual And Parts List

ENGINEERING PRODUCTS CO., INC.
P.O. Box 1510 WAUKESHA, Wisconsin 53187, U.S.A.
414‐785‐0786
Note: When shipped with the tractor, the hitch
assembly is factory mounted in position. Remove the wire
holding the pulley arms (items 4 and 5) up for shipping.
Also, remove the drag link Weldment assembly (items 26,
27, and 28) loosely packed on top of the hitch and follow
instructions in the mower owner's manual for mounting on
the deck.
INSTALLATION ON TRACTOR
Step 1. With bumper facing forward and bars on hitch
outside of hitch blocks on tractor, slide hitch assembly onto
tractor so that studs on onside of hitch bars fit into slots on
hitch blocks. At the same time, studs on the outside of the
hitch blocks will fit into slots on ends of hitch bars.
Step 2. Insert small blank bolt (item 9) from the
outside through the holes just behind hitch studs in upper
part of hitch bars and holes in hitch blocks. Secure with
quick change key (item 10).
98‐7147‐R5
OWNER'S MANUAL AND PARTS LIST
for use with either a 42" or 48" Rotary Mower on
Step 3. Follow installation instruction in owner's
manual for attaching deck to hitch and tractor.
MOWER ADJUSTMENT INFORMATION
For initial installation of mower deck be sure deck is
level at the blade tips. If deck is nose high, the highest
cutting height cannot be reached. Using the big black
knob, adjust the belt alignment idler pulley to just clear the
engine plate. As the drive belt stretches, and sheaves and
pulley wear in, belt alignment will improve.
Notice: Sway chains are not required with revised hitch
model 60‐013.
1
Model 60‐013 Hitch Assembly
1200 Series Power King Tractors
250/0489