Related Manuals for Nauticam NA - GH6
Summary of Contents for Nauticam NA - GH6
-
Page 1: Table Of Contents
May, 2022 NA - GH6 For Panasonic Lumix GH6 Camera PN 17720 User Manual Housing Introduction Package Contents Important Instructions Part Names and Functions Housing Mount Opening the housing Closing the housing Preparation for Use Optional Accessories Care/Storage Warranty Specifi cations... -
Page 2: Introduction
PACKAGE CONTENTS Make sure that you have all the included items listed below before using this product. If some items are missing or damaged, contact your local Nauticam dealer. NA-GH6 Padded Travel Case... -
Page 3: Important Instructions
Only the accesories specifi ed by Use only Nauticam lubricant on silicone Nauticam must be used. Third-party rubber O-ring. accessories may result in malfunctions or damage to the product. -
Page 4: Part Names And Functions
PART NAMES AND FUNCTIONS Rear View LVF lever KEY UNLOCK lever Housing unlock button Focus mode lever AF button Quick button Up button Right button Down button Display button Fn button Left button Delete button Moisture alarm window Multi selector - center... - Page 5 PART NAMES AND FUNCTIONS Top + Front Views M24 Accessory port Drive dial M14 Accessory port Mode dial Exposure compensation button M14 Accessory port Main switch Mode dial lock button Real dial Accessory mounting ball Port index mark Lens release button...
- Page 6 PART NAMES AND FUNCTIONS Back + Side Views Sacrifi cial zinc anodes 1/4” Threaded tripod holes Zoom/Focus knob Playback lever Port lock safety button AF-ON lever White balance lever ISO lever Shutter release lever Movie record lever Front dial Fn2 lever Fn3 lever...
-
Page 7: Housing Mount
HOUSING MOUNT Housing mount Compatible accessories 25624 M14 Vacuum valve II (pushbutton release) M14 Accessory port M10 Accessory port 25221 M10 Strobe mounting ball 25224 M10 Strobe mounting ball with hole M24 Accessory port 25086 M24 adaptor for HDMI 2.0 cable 25099 HDMI 2.0 cable 17954... -
Page 8: Opening The Housing
OPENING THE HOUSING * drawings as illustrations only depress housing unlock button turn housing lock outward lift up the back housing... -
Page 9: Closing The Housing
CLOSING THE HOUSING * drawings as illustrations only before closing the housing, clean and lubricate the main O-ring make sure nothing is caught between front and back housing and that they are fully aligned before locking turn housing lock inward until you hear and feel it click into place housing locked in place securely... -
Page 10: Preparation For Use
PREPARATION FOR USE * drawings as illustrations only Installing the Camera - housing tray attachment unlock camera tray lever and remove the tray from the housing attach the camera tray by tightening the tray screw into the tripod socket of the camera make sure the camera buttons are engaged with the camera tray * pull out the zoom/focus knob if... - Page 11 PREPARATION FOR USE * drawings as illustrations only Port Mounting depress safety button and rotate anti-clockwise lubricant the port O-ring before mounting align index mark push port assembly straight in rotate locking lever clockwise to lock...
- Page 12 PREPARATION FOR USE * drawings as illustrations only Coating housing O-ring Main O-ring remove the main O-ring using an O-ring remover clean the O-ring groove with a cloth and ensure that it is free from salt or other foreign materials lightly coat it with provided lubricant return the main O-ring by slowly pressing from one corner to the whole perimeter...
- Page 13 PREPARATION FOR USE * drawings as illustrations only Setting up moisture alarm CR2032 Battery Alarm ON/OFF remove battery press the battery down until it insulation fi lm click into place switch on the alarm test the alarm - the moisture alarm - connect the wires with a window will fl...
- Page 14 PREPARATION FOR USE * drawings as illustrations only Changing lens/port without opening the housing If using with vacuum valve : remove the cap from the vacuum valve and press the red button to release pressure before unlocking port lock If using without vacuum valve, please follow from step 2 unlock port lock and remove port assembly...
-
Page 15: Optional Accessories
OPTIONAL ACCESSORIES * drawings as illustrations only Vacuum valve system remove the plug of M14 accessory port from the housing remove the cap from the vacuum valve hand pump slightly lubricate the o-ring and make sure the o-ring is in place vacuum valve then tighten the vacuum valve to accesory port... - Page 16 OPTIONAL ACCESSORIES * drawings as illustrations only Strobe Mounting Ball Installing M5 Strobe Mounting Ball - RECOMMENDED M5 screw remove M5 screw with the allen key provided in the screw #25228 M5 Strobe mounting ball directing onto housing package the M5 thread * the anti-corrosion screw may also be Anti-corrosion unscrewed while removing M5 screw, if this...
- Page 17 OPTIONAL ACCESSORIES Installing Viewfi nder fi rstly remove the pre-installed 0.66x viewfi nder gently push the 0.66x viewfi nder from the inside of from the housing by removing the retainer o-ring the housing inside rear housing remove the retainer o-ring from the viewfi nder align the viewfi...
-
Page 18: Care/Storage
CARE/STORAGE Soak the housing system in fresh water Operate all controls and buttons at after salt water usage least 3 times while immersed in fresh water We recommand cleaning and inspecting Protect the housing with robust and the main O-ring each time after diving for shock-proof travel case during trans- any damage and every time the housing portation. -
Page 19: Warranty
NAUTICAM accepts no liability for any damage to and defects in the housing caused by improper use and/or poor maintenance; it is the responsibility of the own- er to carefully follow the instructions in our manuals. -
Page 20: Specifications
Monitor options ( 2.0 ) Monitor options ( 1.4 ) 17922 Nauticam Atomos Ninja V Housing for Atomos Ninja V 5” 17923 NA-Shinobi-H Housing for Atomos Shinobi 5.2” 4K HDMI Monitor 17922S Nauticam Atomos Ninja V-S Housing for Atomos Ninja V 5”... - Page 21 130 Deg. FOV with Compatible 24mm Lenses (incl. fl oat collar) 85201 0.36x Wide Angle Conversion Port *please refer to Nauticam port charts for more setup information. with Aluminium Float Collar (incl. N120 to N100 port adaptor) FLASH TRIGGERING Optical TTL...
- Page 22 Nauticam Internationl Ltd. Rm 2203, CCT Telecom Bldg, 11 Wo Shing St, Fo Tan, Hong Kong Tel. +852 - 26902711 Fax. +852 - 26909778 URL. www.nauticam.com Gallery. www.nauticam.smugmug.com...
Need help?
Do you have a question about the NA - GH6 and is the answer not in the manual?
Questions and answers